Content

• Steps
• Warnings
• What do you need

There is nothing difficult about gluing a mattress. All you need is glue.

Steps

1. 1 Find a hole in the mattress by spraying soapy water over the surface.
2. 2 You will see the bulbs where the hole was. It can be seen if you look closely.
3. 3 Dry this area and trace the hole with a marker to find it later.
4. 4 Wipe the mattress with a dry piece of cloth, being careful not to wipe the marker (you can also use a hair dryer to speed up the drying process).
5. 5 Take hot glue and apply one stroke to the dot marked with a marker.
6. 6 After the glue has dried a bit, press down on the dab of glue to inject the glue into the hole and spread the glue over the surface so you don't sleep on the bump later.
7. 7 Allow the mattress to dry completely and it will soon be ready for you to sleep on.

Warnings

• Do not touch the glue with your finger immediately after applying it to the surface.

What do you need

• Hot glue gun
• Spray bottle for soapy water
• Soapy water
• Marker