Content

• Steps
• Tips
• Warnings

A gorgeous plasticine rose is not only a fun gift, but also a great decoration for your room. This instruction will make it easy for you to do!

Steps

1. 1 First you need colored plasticine. You can also use regular clay, but in this case you will have to paint it yourself. In this case, use a thin brush.
2. 2 Now find a thin stick that will serve as the stem of the future rose.
3. 3 Roll a small piece of plasticine into a thin strip, the edges of which will be slightly thinner than the center. The thickness of the strip should not exceed 5 mm, and make the edges as thin as you can!
4. 4 Now twist the resulting strip like a roll. Round the lower part a little, and widen the upper part. Using a butter knife, try to press in the top edges as shown in the picture.
5. 5 Now make some small and large petals of different thickness. Bend one of the edges of each resulting petal a little, let them look like real ones!
6. 6 Place the petals on the base of the rose, one by one, starting with the largest ones.
7. 7 Now add the stem and leaves.
8. 8 All is ready!

Tips

• Squeeze the bottom edge of the rose a little before adding the stem.
• This rose is a wonderful gift for anyone!
• You can make it harder by putting it in the oven for a while.
• If you want to use the rose for decoration, you don't have to add the stem.

Warnings

• These roses wear out quickly
• Remember that when the clay dries, it shrinks.