Content

• Steps
• Method 1 of 5: Shaving
• Method 2 of 5: Depilatory Cream
• Method 3 of 5: Wax
• Method 4 of 5: Epilator
• Method 5 of 5: Electrolysis
• Tips
• Warnings

The skin in the underarms is very sensitive, so when choosing a method of epilation, be guided by the degree of your own comfort. Shaving is the most popular hair removal method as it only takes a couple of minutes to complete. In addition, painless waxing, which can be done at home, is popular.Hair removal cream is one of the few painless hair removal methods without particular contraindications. A more radical method of hair removal is electrolysis. If you want to get rid of unwanted armpit hair, then by reading this article, you will learn how to do it.

Steps

Method 1 of 5: Shaving

1. 1 Rinse your armpits with warm water. Shaving will be more comfortable if your skin is soft, smooth and warm. You can shave in the shower, or simply wet your armpits with warm water.
   • If you often develop ingrown hairs, use a scrub before shaving.
   • If you have very sensitive skin, shave your armpits at night to allow your skin to heal overnight.
2. 2 Raise your hand above your head. Make sure there are no cuts or other damage to the skin that can be painful while shaving. In addition, tight skin will help prevent skin cuts.
3. 3 Apply shaving cream to your hair. Foam should be used to cover the entire underarm area. If you don't use shaving cream, you could get a razor burn. So don't miss this important step.
   • As a last resort, you can use regular soap. Lather it well before use.
   • You can also use shampoo or conditioner if you don't have other products on hand.
4. 4 Use a new, sharp razor. There are many disadvantages to using a dull or rusty razor. You won't be able to shave thoroughly with such a razor. In addition, you can cut yourself, which can lead to infection and the formation of ingrown hairs. Therefore, use a shaver in good condition.
5. 5 Shave against hair growth. Contrary to popular belief about shaving hair along the growth line, in order to achieve clean, smooth skin, it is recommended to shave hair against their growth. You should drive the razor under your armpits in all directions, because hair grows at different angles. Soak your shaver in water from time to time for a more comfortable shaving experience.
6. 6 Repeat the entire process for the second armpit. Rinse off any remaining shaving cream and check to see if you have completely removed your hair. If hairs remain, repeat again.
7. 7 Wait a couple of hours before using deodorant. Small cuts may remain on your skin while shaving, so use deodorant after two hours to minimize discomfort. If you use deodorant right away, you may experience a burning sensation and rash.

Method 2 of 5: Depilatory Cream

1. 1 Choose a depilatory cream designed for the sensitive area. Depilatory creams can be different. Some are for sensitive areas such as the face and armpits, while others are for removing hair from the legs. Choose the first option; if your chosen cream is ineffective, you can always try another one.
   • Using a cream that is not suitable for your skin type can lead to unpleasant consequences such as rashes and irritation.
   • When in doubt about which cream to choose, choose the one for the face.
2. 2 Wash your armpits. Rinse off deodorant and sweat. You will need to apply the cream to clean skin. Pat your armpits dry with a towel.
3. 3 Raise your hand above your head. Stretch your skin well to avoid irritation. Keep your hand comfortable as you will have to hold it in this position for a few minutes.
4. 4 Apply the cream to your hair. Try not to get the cream on bare skin. Use just enough cream to cover your hair.
5. 5 Wait for the recommended amount of time. Typically, this time is three to ten minutes. Do not leave the cream on the skin for longer than the recommended period of time.
   • If you are using the hair removal cream for the first time, wash it off after one minute to make sure that it does not cause an allergic reaction in your case; look for redness, itching, and rashes. Repeat if no allergic reaction occurs.
   • You may experience a slight burning sensation, but it shouldn't be painful. If you feel pain, wash off the cream.
6. 6 Raise your other hand and repeat the entire process. Apply the cream and wait. Rinse off the cream when done.
7. 7 Take your time to apply deodorant. Wait a few hours to reduce the chance of irritation.

Method 3 of 5: Wax

1. 1 Please note - hair length should be 0.5-1 cm. If you decide to use wax strips, this is the optimal hair length. If the hair is shorter, waxing will not work. If the hair is longer than the specified size, it will not be so easy to remove it either. If necessary, wait a few days for the hair to grow back to the desired length; if they are too long, cut them to the desired length.
2. 2 Get everything you need ready. You can use any wax to remove underarm hair. Typically, wax is sold in a container that needs to be heated in a microwave oven. The kit may also include applicators and strips to remove hardened wax.
   • Heat the wax according to the manufacturer's instructions.
   • Check the temperature of the wax on the back of your hand to make sure it isn't too hot.
3. 3 Exfoliate and wash your armpits. Use a body scrub or loofah to remove dead skin and dirt, then rinse your armpits with water. This will make hair removal easier and prevent the risk of infection.
4. 4 Sprinkle baby powder on your underarms. Use baby powder to make the wax easier to apply. Turn on a fan or open windows - your armpits should be dry when you perform the procedure.
5. 5 Raise your hand above your head. The skin should be as taut as possible. Thanks to this, the depilation process will be faster and less painful.
6. 6 Use wax or wax strips. Dip the applicator into the wax and apply the wax in the direction of hair growth. Take a strip and press firmly on top.
7. 7 Briskly peel the strip away from the skin. Do it quickly, as if you were removing a band-aid. If you do this too slowly, you will not be able to remove all the hair, and it is unlikely to add pleasant sensations.
   • If you are having trouble removing hair, you may not have tightened your skin very well. Try to bend your elbow and pull the skin with one hand while removing the strip with the other.
   • You may sweat a little, which can make your armpit wet. In this case, turn on the fan to cool it down.
8. 8 Repeat until the hair is completely removed. As a rule, two to three repetitions are sufficient. When you have removed the hair from one armpit, move on to the next. If there are hairs left after the procedure, you can remove them with tweezers.
9. 9 Use almond or any other oil. The oil will soothe the skin and help remove excess wax that has remained on the skin.
10. 10 Wait a few hours before applying deodorant. If applied right away, skin irritation may occur. Wait at least a few hours before using any product.

Method 4 of 5: Epilator

1. 1 Make sure the hairs are only a few millimeters long. This is very important if you decide to use an epilator. If you have long hairs under your armpits, it will be difficult to remove them with an epilator. You can shave your armpits and then epilate after a couple of days.
2. 2 Powder your underarms with baby powder. The process of this method consists of pulling out excess hair with an epilator, which pinches the hair in a rotating drum and pulls it out. This is a painful process, but epilation provides long lasting results. Make sure the underarm area is completely dry. Sprinkle them with baby powder. This will help prevent injury to your skin.
3. 3 Raise your hand above your head. Raise it high enough so that the skin under your armpit is well taut.If the skin is not stretched well enough, painful sensations are possible.
4. 4 Run the epilator at a low speed. This is necessary so that you can get used to the sensations.
5. 5 Run the epilator over your armpit. Keep it a short distance from the surface of your skin. You will feel a slight tingling sensation when removing hair. You will soon get used to these sensations and will be ready to move on to the next step.
6. 6 Turn on high speed. You should now be able to remove any remaining hair that you were unable to remove the first time. The skin should be tight.
7. 7 Repeat with the other hand. Start at a low speed, then work your way up to a high speed. Continue until all hair is removed.
8. 8 Use aloe or witch hazel to soothe your skin. The skin will be red and irritated, so use aloe to soothe it.
9. 9 Wait a few hours before using deodorant. If applied right away, skin irritation may occur. Wait at least a few hours before using any product.

Method 5 of 5: Electrolysis

1. 1 Consult a beauty salon. If you want to do this procedure, it is important to choose a reputable salon. Sign up for a consultation where you can get all the information you need.
   • Electrolysis is a method of removing individual hairs from the face or body. The essence of the procedure is the destruction of the hair follicle using chemical or thermal energy.
   • Make sure that the salon uses disposable needles during the procedure.
2. 2 Attend your first hair removal session. The procedure will last from fifteen minutes to one hour. For some, this process is not associated with discomfort, while others experience discomfort. Several treatments may be needed depending on the amount of hair.
3. 3 Take care of your underarm skin after the procedure. Your skin will be red and swollen after the procedure. Use aloe or another ointment that your beautician recommends.

Tips

• Before using a depilatory cream, test it on a small area of ​​your skin to see if it irritates.
• Before buying this or that cream, read its composition, perhaps you are allergic to any of its components.
• If you use a razor, be careful with deodorant! Even a small cut will cause a burning sensation.

Warnings

• You could get a razor burn. A razor burn is an irritating rash and burning sensation that sometimes occurs after shaving.
• If you press too hard or use the wrong razor, you are more likely to cut yourself while shaving.