How to create marble nail polish with water

Author: Clyde Lopez
Date Of Creation: 21 June 2021
Update Date: 1 July 2024
Anonim
Nail Art For Beginners: Basic Water Marbling
Video: Nail Art For Beginners: Basic Water Marbling

Content

1 Apply base coat to your nails. This will protect your nails from staining and breakage.
  • 2 Once the base coat is dry, apply petroleum jelly, lip balm, or tape to the skin surrounding your nail. This will make it much easier to clean it up later!
  • 3 Take as many varnish colors as you want in your design. Use only new varnish of expensive brands, as the varnish should be neither too liquid nor too thick!
  • 4 Pick up an old bowl you don't need. The process of painting your nails is likely to ruin it, so think carefully about it beforehand.
  • 5 Fill a bowl with filtered water. Make sure the water is at room temperature, or let it sit for an hour or two.
  • 6 Select a varnish and remove the brush from it. Do not try to remove the droplet hanging on your wrist. Hold it over a bowl of water, a drop of varnish will fall into the water and quickly disperse over the surface of the water.
  • 7 Do the same with the other polish of your choice and drop it down the center of the first one.
  • 8 Continue changing varnishes until the desired degree of color mixing is achieved.
  • 9 Use a toothpick to split the design in two (the colors will start to mix).
  • 10 Use a toothpick to make as many lines in your design as you like.
  • 11 When you're ready, dip your nail in a bowl and wait 10 seconds for the nail polish to dry, then remove your finger. Using a toothpick, use a rotating motion to pick up the remaining polish in a bowl.
  • 12 The design should be imprinted on your nail.
  • 13 Don't worry, everything will look messy at first, but you will clean up any extra spots on your skin with a cotton ball and nail polish remover.
  • 14 Repeat steps for all other nails.
  • 15 Again, remember to clean the area around your nails with nail polish remover.
  • 16 When the design is dry on your nails, apply a top coat.
  • 17 Ready.
  • Tips

    • Use different varnish colors. Try mixing light and dark tones.
    • It is best to use fresh varnishes, as the old ones set too quickly in the bowl.
    • Use a cotton swab with nail polish remover for cleaning.
    • Use scotch tape on your fingers to prevent dirt on them.
    • When creating a design, using a toothpick is great.
    • Using tape around your nail is great!
    • Using complementary colors looks pretty.
    • Dip your nail into the design at an angle.
    • Do not use more than 3 colors, otherwise there will be too many.
    • Be creative! Nobody will say that you should be like everyone else. You want to stand out from the crowd, so the most important thing is to be yourself!
    • For best results, do a test sample first.
    • After the base coat is dry, apply a couple of coats of white varnish before starting the process.
    • When using a toothpick to create a design, be careful not to fiddle with mixing colors and ruin the design.
    • Try to use expensive varnish.
    • Use light colors.
    • Use an unnecessary bowl.
    • Always use room temperature water.

    Warnings

    • Use an old bowl that you will no longer use for cooking or storing food. After the first use for painting nails, this bowl is only suitable for this purpose.
    • Do not use disposable plastic utensils, as nail polish can dissolve them.

    What do you need

    • A bowl
    • Varnish of different colors (best if they match each other)
    • Cotton balls
    • Nail polish remover
    • Basic coverage
    • Top cover
    • Scotch tape (to protect the skin)
    • Bottled water (room temperature)