Content

• Steps
• Advice

Don't worry about the shoes being a bit oversized as you can still wear them. Try wearing thicker socks, stuffing more paper in your shoes, lining or rolling more insoles, moistening the shoes so that it shrinks or sewing elastic in the shoes ... And the last solution, visit the mechanic. shoes with those shoes.

Steps

Method 1 of 3: Simple methods

1. 

   Wear thick (or multiple pairs) socks. Perhaps the simplest way you can do with loose shoes is to "enlarge" your feet with thick socks. For example, replace a pair of tights or leather socks with sports socks. You can even wear multiple layers at the same time to better fit your feet.
   • Fits: Sport shoes, boots.
   • Note: Do not use this method during hot weather, especially if you sweat your feet a lot.

2. 

   
   
   Tuck a few things into the toe of the shoe. You can use cheap materials (like tissue, toilet paper or even a thin rag), crumple it up and stuff it into the toe of your shoe. This is useful and can be applied anywhere if you feel your foot slipping back and forth in the shoe while moving.
   • Fits: Doll shoes, boots, high heels.
   • Note: Not an optimal choice for hiking; The material "tucked" in the shoe can cause itching and discomfort with prolonged use.

3. 

   
   
   Use shoe insoles. Shoe insoles are thin (usually made of foam or flexible material) and cushion inside the shoe. Insoles are used to aid posture and comfort of the user, but can also contribute to the tightening of shoes that are too wide. You can buy them at any shoe store at reasonable prices.
   • Fits: Most shoes (including heels and open-toed shoes).
   • Note: If possible, try wearing a shoe insole before buying to make sure it is right for you. Famous sports brands such as Nike, Adidas ... also sell shoe insoles.

4. 

   
   
   Use silicone pads. Occasionally, the "raw" cushioning of the shoe insoles causes a tremendous discomfort to wear. Fortunately, small plastic pads have been made to cushion the heel or half of the forefoot (the pads under the toes). These silicone insoles are compact, creating a thin cushion that is hard to see where support is needed such as half of a forefoot, heel or soles, perfect for heels that are just slightly wide a little If inserting the entire shoe lining will make the owner uncomfortable.
   • Fits: High heels, doll shoes
   • Note: These insoles come in a variety of colors so choose the right color for your shoes.

5. 

   
   
   Use ankle pads. Another "local" patch other than the heel pad and half-foot padding is the high heel sole. As the name suggests, they are thin pads used for shoes with a slightly uncomfortable neckline, yet they are designed to fit anywhere in a shoe.
   • Fits: Most shoes, especially high heels, have a tight neck.
   • Note: Try it first as some people say they have swelling in their ankles after use.
   advertisement

Method 2 of 3: Other complex ways

1. 

   
   
   Try dampening the shoes with water. For some types of shoes, you should consider make them smaller by immersing and drying in air. If you do it properly, the results will be great, but be sure to read the labels carefully before starting. See the instructions below.
   • First, get your shoes wet. With leather or suede material, Use a water spray. For casual or sports shoes, soak them in water.
   • Let shoes dry in the sun. If there is no sunlight, use a hairdryer on the "mini" setting. Be careful not to over-dry as some fabrics, like polyester, are flammable or melted.
   • When the shoes are dry, try them on. It is possible to repeat this process several times if they are still wide. If you are afraid that the shoes will be too small, you can dry them while wearing them. Shoes will be small enough to fit your feet.
   • Polish leather shoes after drying. Shoe polishing kits are available in shoe stores or supermarkets.

2. 

   
   
   Use garment industry elastic bands to make shoes shrink. This procedure takes a bit of sewing skills. Attach a piece of elastic to the inside of the shoe to pull the fabric or leather together, making the shoe tighter. What you need is sewing rubber bands, needles and threads. Choose a good elastic band.
   • Sew the elastic band on the back of the shoe, inside the ankle. This position is the best fit, but you can sew into any empty area for good results.
   • Stick the elastic to the shoe, and pull it out while sewing. You can use western needles.
   • Release the elastic. After sewing, release your hand to return the elastic to its normal state, then the material in the shoe will be pulled back. The shoes will be "scaled down" a bit.
   • You can combine this with a wet shoe method or any other trick if needed.

3. 

   Go to a professional shoemaker or shoe repair service. When trying everything and still not satisfied, please seek professional service. Shoemaker (who specializes in working with shoes) is a profession that used to be very popular, but it gradually became less. However, you can ask people around you about a reputable shoe repair address.
   • Fits: High-quality, expensive shoes; The shoes are considered to be your family's "heirloom".
   • Note: The prices of these services are often unpredictable, so use it real worthy. A beautiful pair of shoes that you truly value is a wise choice to bring to shoemakers. Regular sneakers are not required.
   advertisement

Method 3 of 3: Things to remember

1. 

   Try to maintain your posture when wearing shoes that are too big. Always remember that no matter what you do inside the shoe, it is the same on the outside. This can lead to poor posture while walking. When wearing oversized shoes, it is important to maintain good posture to balance with "bigger" feet. See our posture article for more helpful tips. Some general issues include:
   • Erect. Head and chest should be facing forward. Gently push your shoulders back so that your arms are aligned.
   • Use both heels and toes when walking. Step up and put the heel down first, then the soles of the feet, the first half of the front feet, toes and walk.
   • Try to gently stretch your abdominals and buttocks while moving. These muscle groups provide good support to your spine.

2. 

   Carefully lift your legs when moving. Oversized shoes are usually longer than the shoes you would normally wear. This means that when walking, you need to lift your foot a little higher than normal or the toe of the shoe will drag on the ground leading to a trip.

3. 

   Do not wear loose shoes for too long. It doesn't matter what method you use or what object you use to make a shoe fit. As long as you avoid using those oversized shoes for heavy trekking, like hiking or hiking. Your feet are at risk of blistering or scratching due to sliding back and forth in shoes when moving.
   • More importantly, you will reduce your chances of getting injured. Ankle injuries (such as malfunctions or twists) often occur when wearing shoes that are too loose, especially during sports competitions.

4. 

   Replace a shoe there signal bigger than usual. It sounds obvious, but what does this mean: the tips above are there as well limit. If your shoes are one or two sizes larger than usual, don't put extra insoles to wear them. Don't risk pain and possible injury just to wear new shoes. In this case, you should choose to wear old but comfortable shoes rather than regret trying to wear a new pair of shoes that do not fit your feet. advertisement

Advice

• Don't forget to look for shoes that have laces on the ankles or ankles.Some types (usually sandals, high heels or sports) can be tightened or loosened with an adjustable strap.
• Always try on shoes before you buy. Prevention is better than cure; you better find the shoe that fits you at the store, not try to make it fit you better at home!