Content

• Steps
• Advice
• Warning

Today's wikiHow teaches you how to increase the range of your Wi-Fi routers to get maximum performance as advertised by the manufacturer. Normally, we cannot reach the maximum range of the router without using an extension device, such as a Wi-Fi wave amplifier.

Steps

Method 1 of 2: Apply common sense tips

1. 

   Understand the maximum range of your router. Most routers on the market can reach a maximum range of 30 to 46 m. The specific specification will be shown on the package and the instruction manual of the router.
   • If devices within the maximum range of the router are not able to receive reception, proceed with the following steps of this method to amplify the output signal from the router.
   • If the devices that you want to receive signals from are out of the maximum range, you need to move them closer to the router or use an amplifier.

2. 

   
   
   Eliminate obstacles in the signal path. Physical obstacles such as furniture, doors, walls, and equipment can all reduce the signal of the router. If you want to experience the strongest Wi-Fi waves from your router, you need to relocate your furniture so that the signal is not obstructed.
   • Obviously we can't adjust walls and floors to optimize router performance, you just need to move the removable stuff.

3. 

   
   
   Adjust the router location for optimal performance. While the location of the Internet cable will determine where the router is located, there are a few things you can do to improve Wi-Fi range:
   • Place the router as high as possible, right in the middle of the house.
   • Place the router about 1m away from the modem if you are using two separate devices.
   • Try to arrange a clear direct connection between the router and the main Internet-connected device (such as a computer).

4. 

   
   
   Check if you have signal interference. Because the router uses the same Wi-Fi network channel (2.4 GHz) as most other wireless electronic devices, the transmission signal may be disturbed or interrupted due to electronics lying between the router and the device. connected to the Internet (like a computer). Try turning off or moving one of the following devices:
   • Wireless phone
   • Microwave
   • Baby monitoring device
   • Alarm bells
   • TV remote control
   • Automatic garage door opening device

5. 

   You need to make sure your router is using it 2.4 GHz channel. Many routers are "dual-band," meaning that the device supports both the regular 2.4 GHz channel and the less common 5 GHz channel. If your device is a dual-band model, check to make sure you're connected to a 2.4 GHz Wi-Fi network for maximum range.
   • You can connect to an appropriate Wi-Fi network directly from the Wi-Fi menu of your mobile device or computer. A 2.4 GHz channel will usually only show the name of the Wi-Fi network, while a 5 GHz channel will add the word "5 GHz" or "Media" behind.
   • Although the 5 GHz channel typically allows for larger downloads, faster transmission speeds, and uninterrupted Internet, the channel's broadcast range is less than half that of a 2.4 GHz channel.

6. 

   Use an unofficial amplifier. Although not reliable, you can use aluminum cans to increase the range of the router in one direction.

   Note: This method will restrict the router's signal in the opposite direction.

7. 

   Upgrade old router. If you have a router that is 3-4 years old, the performance is probably not what it used to be, and no redesign or additional hardware can fix it. In this case, you should buy a new and modern router instead. advertisement

Method 2 of 2: Use an amplifier

1. 

   Buy a Wi-Fi amplifier. These devices work exactly as their name suggests: they pick up your router's signal and play it back so you can connect to the network without moving your router or Internet device. There are many models of Wi-Fi amplifiers available online or in stores, so just choose one with good reviews and a comfortable price.
   • You can invest between 800,000 and 2,300,000 VND for a suitable Wi-Fi amplifier.
   • Most Wi-Fi amplifiers can work with multiple models of routers, but if possible, you should purchase products from the same company.

2. 

   The Wi-Fi amplifiers will differ. While the following instructions have been drawn from the various Wi-Fi amplifier setup procedures, you should also check out the description specific to your current range extender and router.

3. 

   Find a wall outlet near the router. Ideally, you should install the amplifier in the same room where the router is located, so look about 6 meters from the router to plug in the range extender.
   • With a wireless Wi-Fi amplifier, simply turn on your device and skip this step and the next.

4. 

   Plug in the extender. Plug the extender into the wall outlet through the device plug. The light on the extender (if applicable) will light up when the unit is connected to a power source.

5. 

   Press the WPS button on the extender. The WPS (Wi-Fi Protected Setup) button will be on the front or side of the extender, but you may need to check your device's documentation to confirm it is correct.

6. 

   Find and tap the WPS button on the router. Usually the WPS button is located behind or below the router. The range extender will be connected to the router.
   • If your router doesn't have a WPS button, follow the instructions in the Wi-Fi extender's manual to set up otherwise.

7. 

   Fix the Wi-Fi extender. After connecting to the router, find an outlet somewhere between the router and the room where you want to extend the Wi-Fi signal and plug the device in.
   • Make sure that the extender is not near other wireless device (such as a microwave).
   • You will most likely have to plug the Wi-Fi range extender into an outlet near the floor, which will limit the range of the device. We can fix this problem using an extension cable.
   • Although some newer amplifiers will not affect your Internet speed, many can reduce the line speed in half.

8. 

   Connect to the router. Using your computer, smartphone or tablet, select your router's wireless network name from the Wi-Fi menu (now available thanks to the amplifier), then enter the password to connect concatenation. advertisement

Advice

• Some Wi-Fi hardware companies make "mesh" devices, which are essentially two or more miniature wireless routers located around the house. Despite its high cost, mesh networks provide uniform and wide coverage.
• Old and traditional houses have walls made of wooden columns, while office buildings, buildings and apartments are often built with metal columns in the wall. This metal system can greatly affect Wi-Fi waves, so consider the type of construction you construct when diagnosing signals.

Warning

• Extending your router's signal without following national Wi-Fi network procedures might cost you a fee. Check with your service provider about this to see if the work you are about to do is legal.