Content

• To step
• Method 1 of 2: Replace screwable nose pads
• Method 2 of 2: Replace clickable nose pads
• Tips

If the nose pads on your glasses are damaged or don't fit properly, you can easily replace them. Whether it's the traditional screw-on nose pads or the clickable ones, changing them is easy and cheap!

To step

Method 1 of 2: Replace screwable nose pads

1. Measure the old nose pads. Nose pads are usually measured in millimeters and this refers to the length of the nose pads. Measure across the longest part of a nose pad with a ruler or tape measure showing millimeters. For D-shaped nose pads, for example, measure from the top of the "D" to the bottom of the "D" instead of across the "D".
   • The size of nasal pads varies from 6 to 24 ml.
2. Buy replacements that are the same size and shape as the old nose pads. In addition to size differences, nose pads come in a variety of shapes such as teardrop, rectangular, circular or D-shaped. Look for the same size and shape online, at a drugstore, an optician, or your ophthalmologist.
   • Nose pads are also offered in a variety of materials, including: glass, plastic, rubber, ceramic, and silicone. Consider trying silicone for comfort, even if your old nose pads are made of a different material.
   • You can purchase replacement nose pads in a kit that also includes a small screwdriver, magnifying glass, cloth, and screws. If you don't buy a set, you need a flat jeweler's screwdriver.
3. Remove the old or damaged nose pad that needs to be replaced. Hold your glasses gently with one hand with the nose pads facing you. Find the screw on the nose pad. Carefully insert the screwdriver into the groove and turn the screwdriver counterclockwise until the screw is loose enough to pull out. Remove the nose pad from the mounting arm.
   • You can reuse the screw if you want, but check that the threads are not worn and that the head is intact.
4. Place the new nose pad on the mounting arm. Make sure to align the hole for the screw on the nose pad with the one on the mounting arm. If you find this difficult, try using tweezers instead of your fingers to hold the nose pad.
   • For the D-shaped nose pad, there is a difference on the right and left side. The flat edge of the "D" faces away from the face.
5. Insert the screw through the hole on the nose pad. Insert the screw into the hole with your fingers or tweezers. Balance it there while you grab the screwdriver.
6. Tighten the screw. Carefully insert the screwdriver head into the groove of the screw. Apply just enough pressure to hold it in place while turning the screwdriver to the right. Once the screw is stuck, you can apply more pressure to tighten the nose pad in place.

Method 2 of 2: Replace clickable nose pads

1. Measure the nose pads you want to replace. Nose pads are measured in millimeters and the size is determined by the length. Use a measuring tape or ruler that shows millimeters to measure the longest part of the support. For example, if you have teardrop struts, measure from the top of the drop to the bottom, instead of straight through the struts.
   • The size of nasal pads varies from 6 to 24 ml.
2. Buy the correct size and style of replacement nose pads. Nose pads come in different shapes and sizes. The most common nose pads are D-shaped or oval, but there are also round, square and teardrop-shaped nose pads. Research your old nose pads and look for the same shape online, at a drugstore, or at an optician.
   • Silicone is considered the most comfortable material for nose pads. Consider trying these, even if you are replacing nose pads made of a different material.
   • Clickable nose pads can also be referred to as push-in or click nose pads.
3. Remove the old nose pad with a butter knife or flat screwdriver. Grab your glasses with one hand and the nose pads up. Press your thumbnail of the same hand against the attachment of the nose pad you want to remove. Place the tip of the screwdriver or butter knife between your thumbnail and the nose pad and turn the tool slightly to release the nose pad.
4. Place the new nose pad on the mounting arm and press it into place. Align the small tab on the back of the nose pad up to the hole in the frame. This can be on a mounting arm or directly on the bridge of the frame. Press down gently and you will hear a click when the support is properly secured.
   • If the nose pads are D-shaped, make sure the flat edge is pointing away from the face.

Tips

• If you cannot replace your own nose pads, you can have this done by your ophthalmologist or opticians. If you buy the replacement nose pads there, it will usually be done for you for free.