Content

• Method 2 of 2: Troubleshoot common problems
• Tips

1 Make sure the clipper is on a level surface. To locate the leak, look at where the water is collecting and try to locate where it flows out of the machine. If the washing machine is not level, it will be more difficult to locate the leak.

2 Diagnostics of malfunctions. Before starting to replace hoses and gaskets, make sure that the leak is not caused by a more prosaic reason. Review the instruction manual for your washing machine. Here are some common problems:

• The washing machine is overloaded or unstable. The reason for the leak may be that you are trying to load too many things into the machine. Also, make sure that heavier items are not piled up in one direction and do not create an imbalance that can shake the washing machine.
• Stop rinsing to add time. If your machine has a shower rinse function, adding time while spraying will increase the cycle time and may cause water leakage.
• Remember to remove the drain plug. When purchasing a new clipper, be sure to remove the drain plug before connecting the drain hose. If you start the wash cycle and do not remove the plug, the machine will not be able to drain the water.
• Check that the drain hose is properly connected to the downpipe. Incorrect connection can also cause leakage.
• The drain may be clogged. It may seem like your washing machine is leaking, but the problem is actually a clogged drain. Check that the drain is free.

3 Excessive foaming. If the detergent you add to the washing machine produces too much foam, it can cause overflow and water leaks. This is a fairly common problem when using water softeners, which can increase the amount of lather. When using water softeners, add less detergent.

• To check for excessive foaming, load as usual. When removing laundry from the washing machine, place any washed item of clothing in a bowl of water and rinse it out. If the water becomes soapy, the laundry is not completely rinsed out of the foam and you are probably using too much detergent.

4 Put on the wash and see where the water comes out. Load the washing machine normally, turn on the wash and try to find where the leak is. Often, locating the leak is sufficient to identify the problem.

• Leaks from the front of a washing machine are often caused by a clogged overflow tube or a loose old gasket (on front-loading machines).
• Leaks behind a washing machine are often caused by loose or damaged hoses.
• Leaks under a washing machine are often caused by a hole in the pump or leaking internal hoses.

5 Change the most common leaking parts systematically. If you cannot determine the exact cause of the leak and you still have an old washing machine, then it is best to try replacing or repairing the hoses and fixing other probable causes. Over time, parts of the washing machine can become clogged or become less elastic, which is what causes leaks. After all, they should be replaced periodically, so why not do it now and try to fix the leak?

• If you don't want to do everything all at once, start with the most common fixes, then wash, and if the leak persists, follow the next step on the list. Continue until the leak is repaired.
• If your machine is still leaking after the usual fixes, contact your washing machine manufacturer and try to explain the situation. Perhaps it's time to put up with it and call a washing machine repairman.

Method 2 of 2: Troubleshoot common problems

1. 1 Turn off the power to the clipper. Make sure the clipper is not plugged into the mains and only then get to work. Troubleshooting while the power is on may result in injury.
2. 2 Checking and repairing the supply hoses. They are located at the back of the machine and provide water supply during washing. Old or damaged supply hoses are a common cause of leaks from the back of the machine. If it is the supply hose that leaks, then water will drip throughout the entire wash cycle. You can repair the hose in the following way:
   • Shut off the water supply or shut-off valve.
   • Unscrew the supply hoses with pliers.
   • Examine the hoses. If they look old and pitted, replace them with whole hoses and fit new gaskets.
   • If everything is OK with the hoses, replace the inner gaskets. Old pads lose their elasticity and do not fit so tightly.
   • Before turning on the machine again, make sure that all connections are tight and secure.
3. 3 Check and replace internal hoses. The hoses inside the washing machine can also be damaged or worn out, so they also need to be replaced periodically. To gain access to the internal hoses, you will need to unscrew the bolts and open the body of the washing machine or remove the panel behind which the hoses are located.
   • Check for old, pitted or torn hoses and rusted clamps.
   • To remove the hose, grasp the clamp with pliers and slide it over the hose, then disconnect the hose.
   • Replace old hoses and clamps with new parts.
4. 4 Check the pump. The pump moves the water from the washing machine drum to the drain hose. It has internal seals that wear out over time and can lead to leakage. If you find signs of a leaking pump - stains or rust - then it will need to be replaced.
   • Buy the right pump for your washing machine.
   • Open the body of the washing machine.
   • Loosen the engine mounting bolts.
   • Disconnect the pump hoses and turn it off, then remove the pump and replace it with a new one.
   • For detailed instructions on how to replace the washing machine pump, see How to replace the washing machine pump.

Tips

• Avoid placing the clipper completely on one side.
• When you move the clipper away from the wall, it should be empty. Take care not to damage or scratch the floor covering.
• A broken hose or damaged pump must be replaced with new spare parts.
• Opening the case of new washing machines is not easy.
• To remove the gasket from the hose, you will need to pull it out of the wall or drain.