Content

• Method 2 of 3: the process of making a sundress for a girl
• Method 3 of 3: The Skirt Making Process
• Tips
• Warnings
• What do you need

1 Find one or more interesting pillowcases. Look for interesting colors, textures and materials. You can find eye-catching satin, lace-trimmed fabric, or 70s prints. Vintage lines are especially fun, so look everywhere at home and second-hand stores.

• Of course, it will be easier to alter a pillowcase for a very little girl. Anything bright and colorful will do just fine.

2 Find out what you need. The amount of fabric will vary depending on the size of the person you are sewing the dress for. If the dress is for a little girl, calculate the cost as follows:

• 6 - 12 months: width - 15 '', length - 18-19 '', finished product length -14 -15 ''
  
  18 - 24 months: width -18 '', length - 24-31 '', length of the finished product - 20-27 ''
• Decide how much length you want and then add 3-4 'for the seam allowance. It should start at the collarbone and go down to the knee.

3 Take your materials. A pillowcase dress is one of the simplest types of dresses and requires a minimum of sewing. Decide on your creative space, making sure the space is wide enough to work and roll up fabric. You will need:

• Pillowcase
• Scissors
• Ribbon
• Bias binding (optional)
• The size and length of the pillowcase and ribbon according to the size of the person on whom the dress is sewn

Method 2 of 3: the process of making a sundress for a girl

1. 1 Cut the curved edge. Use sewing scissors to transform a baggy outfit into something more stylish.
   • Try, but don't worry if the cut isn't perfect. You will still have to bend the edges of the cut.
   • If you want the pillowcase to be shorter, cut the length you want.
2. 2 Cut out curved holes for the arms. Start cutting from the end closest to you.
   • Fold your pillowcase in half to cut out two identical pieces.
   • Use a different dress as an example, or just do it by eye if you are confident in your abilities!
3. 3 Sew the folded edges. This dress is sleeveless, so don't hem the front and back together!
   • Use a bias tape (if you have one) to make your dress look “edged”.
4. 4 Sew the drawstring of the front and back of the dress. Use an iron to iron the fabric before sewing to ensure a symmetrical drawstring for the ribbon.
   • Pin the drawstring of the front and back parts so that nothing moves. In addition, it is a good idea to twist the edges of the dress.
5. 5 Pull the tape all the way through the drawstring. This requires a sufficient length to stretch the ribbon and easily tie it around the shoulders.
   • Double the length of the ribbon so there is enough to cross the width of the dress, including the shoulder area, making sure there is enough for you to tie the bow. Fold it in half so that the two edges are the same length.
   • Use a safety pin to pull the tape through the drawstring.
6. 6 Tie both ends of the ribbon around your shoulders to serve as the straps for your sundress. Assemble the dress, taking into account the size of the person you are sewing on. ...
   • Once you've set the length of the ribbon, it's a good idea to have a fixed bow as it won't come loose when you put on a sundress.
7. 7 Tie another ribbon or sash around your waist, if so desired. It should run around your natural waistline, which is the narrowest part of your torso.
   • For a little girl, this is not necessary at all. If you sew a sundress as a gift, make a belt just in case.

Method 3 of 3: The Skirt Making Process

1. 1 Cut the curved edge. Make sure the pillowcase fits over your head and thighs. The open hem is already hemmed for you!
   • Of course, you can always measure the pillowcase around your waist and hips before you start sewing.
   • If you need more than one pillowcase for your waist, take two with the same pattern, open both along the long seam, and sew them together. You can also trim them to the size you need or pick up excess material.
   • If you need less fabric for your waist, flip the pillowcase inside out and attach pins to where the fabric rests loosely on the contours of your body. You will need to iron and sew.
2. 2 Fold and sew the drawstring. If you sewed a sundress, then here is a similar practice. Fold over the edge an inch or two (2.5 to 5 cm) to form a lacing channel.
   • Leave a 1 inch (2.5 cm) open hole for the elastic to fit in. You can do this from the front and center, or from the side. ... The elastic can also be worn on the outside if you choose a matching ribbon that you proudly display.
3. 3 Pull a string or elastic through the drawstring. Fit it to your waist or whomever you are sewing for.
   • Attach a pin to the end of your lace to easily thread it through the channel you made.
4. 4 Ready. Add some decoration if you want to create your own personal style.
5. 5finished>

Tips

• Go to a junk or garage sale. There you can find some pretty cheap, cool pillowcases with retro lines or solid colors.
• For tunics or short dresses, steam about a foot (30cm) of the closed seam so your head goes through, and open the long, tight side slits for the arms. You may want to wear a belt or drawstring to shape your waist.
• For a pencil skirt, sew a drawstring at the bottom of the skirt and insert the ribbon. Tie a bow on the outside back at the center or side.

Warnings

• Thin, white cotton fabric may show through. Raise your chosen pillowcase to the light, think about what you can do with layering, put on slip linen, or look for something with a bright print or pattern.
• Use sewing scissors and sewing machine carefully.

What do you need

• Pillowcase
• Scissors
• ribbon
• Measuring tape
• Bias binding (optional)
• Sewing machine
• Iron
• Safety pins (optional)
• Decorating (optional)