How to make jeans cuffs

Video: CUFF Your Jeans Like a Pro | The Pinroll

Content

Part 2 of 3: Creating a Test Cuff
Part 3 of 3: Sewing the cuff
Tips
What do you need

1 Check out the pictures of the different styles of cuffs. In case you haven't noticed, cuffs of different shapes are present throughout the garment. Look at pictures in fashion magazines or on the Internet and notice how other people are making cuffs on jeans.

2 Find the option that works for you. Factors to consider include the width, the cut of the jeans, the type of shoe you want to wear with it, and whether you want a cuff that adds length to your silhouette. The cuffs are of the following types:

Single cuff: the jeans are folded once approximately 2.5 cm with the ability to tuck the hem under the folded part. This option is suitable for a variety of jeans styles and for all body types due to its moderate length. Avoid tight shoes because they can look like slippers with these non-tapered cuffs.
Long cuff: it is made according to the principle of single, only longer - up to 5 cm. It is suitable for the denim you want to show. However, people of small stature should beware of this type of cuff, as it visually makes the torso shorter. A more casual look involves folding the cuff like an accordion to add volume and texture.
Narrow cuff: mini cuff, about 1.25 cm. Made of three small cuffs and wrapped tightly at the hem. As the name suggests, this cuff is perfect for slim silhouettes and lightweight denim. Neat shoes will look good, but massive shoes should be discarded.
Double cuff (thick cuff): first fold the hem about 2.5 cm, then fold it again, but already 5 cm. This cuff will look best on jeans made of lightweight fabric, on denser jeans the cuff will bulge a lot. This look can be complemented with massive shoes, but remember that this visually shortens the torso.
Inner cuff: Instead of tucking the cuff up, tuck it in. The hem is hidden and the jeans look very even. Your jeans should be tight to support the cuff. Depending on the width of your jeans and how far you have tucked them in, this cuff can be paired with different types of shoes. Another advantage is that this cuff visually lengthens the torso.

3 Try on jeans and make cuffs. If possible, stand in front of a full-length mirror.

By putting on your favorite shoes and top, you will be able to determine which type of cuff is best for you.
Initially, you can use a ruler or tape measure, and then act as you see fit.

4 Don't forget to measure the folds of the cuff. Use a ruler or tape measure to measure the length of each fold of the cuff and record the data. You will need this later.

Part 2 of 3: Creating a Test Cuff

1 Wash your jeans. Wash your jeans in cold water to prevent them from shrinking and discoloration.
- Follow the instructions on the label, if any. It may indicate wash jeans inside out.
- Remove jeans from the washing machine immediately after washing to prevent creases.
2 Place the jeans on a flat surface while they are still damp. Smooth the fabric with your hands as best you can.
- You can use one or two thick towels if you don't want to wet the surface.
3 Make a cuff. Take your notes on the length of the pleats, squeeze the bottom of the jeans before they are folded into the cuffs. Make sure there are some folds.
- Repeat the procedure with the second leg, making sure the cuffs are the same length.
4 Let the jeans dry. Leave them on a flat surface until dry. You probably want to hang them on a string, but in this case, the cuffs can unfold.
- It would be good to use a tumble dryer if you have one (you can let the cuffs drape a little if your jeans are too long).
- Flip your jeans over from time to time to dry evenly.
5 Iron your jeans. Once your jeans are dry, take out your ironing board and iron your jeans with an iron.
- Pay attention to the label, which should indicate in what temperature conditions the fabric can be ironed.
- Iron on both sides to make sure all creases are removed.
- Smooth down the cuffs (unless you want them to have messy folds).
6 Try on your updated jeans. Try on your jeans with different shoes to find the perfect ensemble. Start hemming when you think you've found the perfect cuff.
- If you have worn the jeans several times, you will need to repeat step 2, points 1 - 6 before you start hemming.

Part 3 of 3: Sewing the cuff

1 Take off your jeans and prepare a thread with a needle. Use a thread color that matches your jeans. The needle must be sharp and strong enough to go through the tight fabric of the jeans, so a gypsy needle is appropriate. If your jeans are made of lightweight fabric, a regular medium needle will suffice.
2 Sew on the cuff with a stitch. Do this in two places on each leg, where the vertical hem of the pants matches the horizontal hem of the cuff.
- Insert the needle from the inside of the leg and sew enough stitches to secure the cuff.
- The needle should not extend completely to the outside. Sew only the first layer of hem.
3 Trim each side with a knot on the inside of the cuff. Repeat the process with the second leg. You did it!

Tips

If you only hem the cuffs in two places, you can easily remove them. Just cut off the stitches with nail scissors and you're ready to experiment further.
Permanent cuff wear will fade the denim stitching. For many, this is part of the beauty of denim and the uniqueness of a particular pair of jeans.