Author:
Alice Brown
Date Of Creation:
23 May 2021
Update Date:
1 July 2024
![How to make a Spray Paint Stencil](https://i.ytimg.com/vi/VOZZaPI9nvQ/hqdefault.jpg)
Content
1 Think about the plan first before you start making stencils.- Decide on the size of the stencil. If it is large, then small details can be included in it. If it is small, then its design should be simpler.
- Know how many colors you are going to use in the stencil. This will affect the amount of materials you need to create the stencil.
![](https://a.vvvvvv.in.ua/society/kak-sdelat-dekupazh.webp)
![](https://a.vvvvvv.in.ua/society/kak-sdelat-dekupazh.webp)
- If you are drawing the image yourself, clearly outline the areas to be cut out. Remember that you must clearly draw out the contours and details of the image, otherwise the stencil will not reproduce the original drawing.
- If you are using a photo or an outlined picture, then you will need to use software that can adjust the contrast and brightness of the image so that dark and light areas appear clearly in it.
![](https://a.vvvvvv.in.ua/society/kak-sdelat-dekupazh.webp)
![](https://a.vvvvvv.in.ua/society/kak-sdelat-dekupazh.webp)
- Cardboard or polystyrene sheets are good for large, plain stencils for flat surfaces.
- The paper is suitable for making a disposable stencil for flat or rounded surfaces.
- Poster paper holds better than plain paper and can be used on flat or slightly rounded surfaces.
- Plastic or clear acetate film is good for making reusable stencils for flat and rounded surfaces.
- Masking film with a slightly tacky underside is good for flat and rounded surfaces.
![](https://a.vvvvvv.in.ua/society/kak-sdelat-dekupazh.webp)
![](https://a.vvvvvv.in.ua/society/kak-sdelat-dekupazh.webp)
![](https://a.vvvvvv.in.ua/society/kak-sdelat-dekupazh.webp)
![](https://a.vvvvvv.in.ua/society/kak-sdelat-dekupazh.webp)
![](https://a.vvvvvv.in.ua/society/kak-sdelat-dekupazh.webp)
Tips
- Use a construction knife on a special surface, such as a cutting board.
- If you are working with a photograph or a picture, you can modify the image so that it suits for making a stencil.Sometimes you need to add some contours or exclude some dark areas in order for the stencil to adequately convey the original image.
What do you need
- Drawing or picture for stencil
- Image processing software
- Printer
- Printer paper
- Cardboard or polystyrene sheet
- Poster paper
- Plastic or clear acetate film
- Masking film
- Masking tape
- Copy paper
- Construction knife
- Spray glue
- Spray paint (for stencil painting)
- Any paint (if spray paint is not available)
Total costs
- Roughly 500-900 (if using cardboard / polystyrene sheet, but may be larger if using high quality spray paints)