Content

• Steps
• Method 1 of 3: Prepare your skin for epilation
• Method 2 of 3: Use wax strips
• Method 3 of 3: Using Liquid Wax
• Tips
• Warnings

Hair removal in the salon can be too costly and time-consuming. However, you can try to get rid of your hair with wax at home. There are two basic, fairly simple methods, but both are a little painful.

Steps

Method 1 of 3: Prepare your skin for epilation

1. 1 A skin scrub must be used. Apply the scrub about a day before your procedure if you plan on using wax strips or hot wax.
   • A loofah or scrub will help get rid of dead skin particles, after which the wax will be able to capture the hairs as efficiently as possible. After the procedure, it is necessary to wash the skin with soap and water and dry it completely.
   • After cleaning, sprinkle the area with baby powder. It will absorb excess moisture, allowing the wax and fabric strips to adhere as closely as possible to the skin.
   • You can wax the area above the upper lip, armpits, arms and legs, abdomen, back and bikini area. Any leftover residue, such as lotion or cosmetics, will make the procedure less effective.
2. 2 Reduce skin sensitivity. There are a few simple rules that you can follow to reduce the pain of epilation.You can also use other methods to remove hair without waxing.
   • If your skin is too sensitive, take ibuprofen half an hour before your procedure. Rushing through the epilation process will not be beneficial, so be prepared to spend about an hour of your time.
   • During your period, try not to use wax just before and immediately after your period; the skin may be more sensitive, which means the procedure will become painful.
3. 3 Epilate in a warm room. A good option would be the bathroom immediately after taking a hot shower.
   • The procedure will be much more painful if wax is applied in a cold room. The warm air opens the pores and the hair comes off much easier. This tip also applies to eyebrows!
   • You should not shave the area on which you plan to use wax for several days; results will be much better if the hair is at least 0.5 centimeters long.

Method 2 of 3: Use wax strips

1. 1 Heat the strip by holding it between your palms for a few seconds. Heat the strips as needed and then discard them as soon as they become ineffective.
   • Slowly peel the strip in two, exposing the waxed area. The advantage of wax strips is that you do not need to heat the wax separately.
   • The disadvantages include painful sensations during application, since the wax remains cold.
   • Choose suitable wax strips. When using the strips, make sure they are suitable for the exact area you are going to epilate. Do not use the leg strips on the bikini area or on the face.
2. 2 Apply the strip to your skin, then smooth in the direction of hair growth in a quick motion. Press the strip against your skin.
   • When using the strip on your legs, you need to smooth it down the skin, as hair grows here in this direction.
   • It is necessary to press the strip against the skin until the wax cools down. It only takes a few seconds.
3. 3 Hold the leather taut near the bottom edge of the strip, then pull it off in the opposite direction with a quick motion. Keep the strip as close to your skin as possible as you pull it off.
   • Do not use wax on the same spot twice. A sharp movement against the growth of the hair allows it to be pulled from the root, which leads to further thinning. The effect after using the wax lasts about two weeks.
   • Keep your skin taut until the discomfort disappears. All residues of wax are easily washed off after the procedure. Remove it with baby oil. In some cases, a rash may appear after hair removal.

Method 3 of 3: Using Liquid Wax

1. 1 Heat the wax. If you bought liquid wax from a jar, you may need a wax melter to heat it up, or simply melt it in the microwave. It will take 15-20 seconds to warm up the entire jar, and you can melt half of the container in 10 seconds. The consistency of the wax should be similar to maple syrup.
   • Follow the directions and heat the wax properly to avoid scalding your skin. Check temperature before application to avoid scalding.
   • When using liquid wax, you will also need special waxed paper (available at any grocery store) and some wide wooden ice cream sticks.
   • Muslin or other fabric strips are also needed. Always check the heating of the wax on the inside of your wrist so that you can select a comfortable temperature. Too cold wax will not work, and too hot will burn.
   • Follow the directions carefully and heat and stir the wax at the specified intervals to keep it from boiling. Overheated wax can lose its properties and become less effective.
2. 2 Dip the applicator in warm wax. Usually a spatula comes with wax.Alternatively, you can use a popsicle stick to spread the warm wax over the area of ​​your skin.
   • Apply wax in a thin layer in the direction of hair growth. Quickly attach a cloth strip and smooth in the direction of hair growth. Prepare the strips ahead of time to prevent the wax from hardening on the skin while you search for them.
   • The wax layer should not be too thin or thick, because depending on the amount of hair, the amount of wax required also changes. The more wax is used, the more painful the process will be.
3. 3 Place a strip of cloth against the wax in the direction of hair growth and leave a loose piece of cloth to pull comfortably. Press the strip against your skin. Stretch the leather, and then pull the fabric off with a quick motion. This must be done in the opposite direction to hair growth.
   • Press down on the skin with the palm of your hand to calm the nerves. Use another strip to remove the remaining wax from the skin.
   • Do not peel off the strips too slowly, as this will only increase the pain. Get ready to do it in one quick move.
   • Hair removal is too short, wax is too hot, in the wrong direction, or the wax is not thick enough to epilate.

Tips

• The structure of the skin and hair follicles is different for each person. Experiment with the amount of wax, its temperature, the time the strip is pressed against the skin, and other nuances to find the most effective combination for you.
• Using wax on the same area twice can damage the skin and make the procedure very painful.
• Always use baby powder. It helps to increase the effectiveness of the product and reduce redness after epilation.
• Use tweezers to remove loose hairs remaining after epilation.
• Always heat the wax to the correct temperature; this will make the procedure more efficient.
• Use wax only at normal body temperature.

Warnings

• Waxing may not work for people with sensitive skin.
• Always test on a small area of ​​skin before using wax or wax strips.
• Never use wax on the same area twice. This can irritate the skin and cause swelling and redness.