How to fold a paper jet

Author: William Ramirez
Date Of Creation: 16 September 2021
Update Date: 1 July 2024
Anonim
EASY F-15 Paper Airplane! How to make an Amazing Paper Jet, Designed by Project Paper
Video: EASY F-15 Paper Airplane! How to make an Amazing Paper Jet, Designed by Project Paper

Content

1 Fold a piece of paper in half lengthwise. You can even crease the fold after folding the paper for extra strength. It is best to use regular A4 printer paper. You can use metallized colored paper if you have one.It will be heavy enough to make bends and light enough for the finished plane to glide through the air.
  • 2 Lay out the paper. Just unfold the fold you made.
  • 3 Fold the top two corners inward to form two triangles, adjacent to each other in the center. You can run your fingers along the folds of the paper to harden them.
  • 4 Flip the paper over to the other side. Rotate the paper so the triangles are on the bottom.
  • 5 Fold the top triangle of the paper down along the bottom of the paper. That is, you have to lay it down with a mirror image of yourself. If earlier the triangle was pointing up, now it is looking down. The overall shape of the shape is now rectangular.
  • 6 Fold the top two corners inward to form triangles again. Do the same as you did the first time. You just end up with two thicker triangles that are adjacent to each other in the center.
  • 7 Wrap three small triangles from the vertices of the three triangles in the center. Fold in the small triangles at the right, left, and center large triangles.
  • 8 Fold the paper in half. Fold the paper in half along the original center fold with triangles outward. If you do it wrong, the triangles will be facing each other.
  • 9 Fold over one side of the paper to create a wing. Take the diagonal side of the paper and fold it towards the bottom of the plane.
  • 10 Fold the wing on the other side of the paper in the same way. Do exactly the same for the second wing as you did for the first wing.
  • 11 Get your paper jet ready for flight. Grasp the thickened paper under the wings and spread the wings to create more lift. Now you can launch the plane into the air and watch it fly. You can run it parallel to the ground or in an upward arc. Do not throw it into the ground or straight up, so it will not stay in flight for long.
  • Tips

    • When launching the plane, lift its nose up a little and throw with little force so that it can make a soft landing, with medium force so that it flies far and fast, and hard for special tricks.
    • Make sure the wings are not down, or the plane will be very unstable in the air.
    • Do not fly the plane straight up if there is no wind outside, as this will remember and blunt the nose of the plane. If you launch the plane in the wind straight up, then first it will take off high up, and then flip over.
    • This aircraft will automatically land on the lower center fold as intended.
    • It is recommended to fly the aircraft outdoors where there is a lot of open space.
    • An excellent aircraft for air races, as it flies very far and does not break upon landing.

    Warnings

    • Do not throw airplanes in your eyes.

    What do you need

    • Plain Printer Paper
    • Arms
    • Flat surface