Content

• Steps
• What do you need

Anyone who has dropped their iPhone in water knows the fear of the possible consequences of such an incident. In this guide, you will be able to learn how to keep your iPhone dry with a 95% success rate.

Steps

1. 1 After your iPhone has been damaged by water, do not try to turn it on. This is the main reason for phone breakdowns when it gets into water. If you turn on your phone when there is still water in it, then you will most likely short-circuit your iPhone and burn the motherboard.
2. 2 As soon as you take your phone out of water, or any other liquid, wipe off as much water as possible from its surface.
3. 3 Using a 5-point pental screwdriver, remove the two screws at the bottom of the iPhone (for iPhone 4 / iPhone 4S / iPhone 5.) If you do not have such a screwdriver, skip to Step 6.
4. 4 Remove the battery, motherboard, and any other components that have been damaged by water.
5. 5 Clean the motherboard and other components with 99% isopropyl alcohol using microfiber. Try to carefully remove the liquid from the connectors on the motherboard.
6. 6 Place the motherboard and other components in a closed polypropylene container with silica gel for 24-48 hours. Place the phone completely in silica gel if you are unable to detach some of the components.
7. 7 After you put your iPhone back together, try turning it on. If iPhone turns on but the LCD (LCD) looks fogged up, it has absorbed water and you will need to replace the LCD. With this procedure to fix iPhone water damage, we had a 95% success rate for iPhone 4 / iPhone 4S / and iPhone 5.

What do you need

• Silica gel
• If there is no silica gel, then use rice
• Pental screwdriver