Content

• Method 2 of 3: Shave
• Method 3 of 3: Finish shaving
• Tips
• Warnings

1 Find the right razor. Consider hair thickness, skin texture, your favorite shaving method, and other factors. Men with thick beards and sensitive skin are advised to use a regular razor with multiple blades.

• Electric shavers shave quickly and are comfortable to use. They do not require the same skin preparation as with traditional shaving and have less impact on sensitive skin. However, sometimes these razors will leave patches of hair on your face. Regular razors are suitable for men with all skin and hair types.
• If you often get red spots after shaving, special razors designed for men with stubborn hair are suitable for you.The purpose of shaving with this razor is to cut the hair as short as possible and prevent it from growing in. Using pre-shave products, lotions, talcum powder, and aftershave cream can reduce red breakouts.
• If you have acne and need to shave an inflamed area, try both an electric razor and a regular razor to see which razor is best for you. Soften your hair with warm water and soap, and then shave very gently without pressing too hard on the razor.

2 Monitor the condition of your shaving tools. Shaving with a dull razor will leave cuts and sore skin on your skin. Try to shave only with sharp, clean blades.

• Before shaving, you should fill the sink with cold, clean water so that you can rinse the razor in it later. Hot water will expand and blunt the metal, so it is better to turn on the cold water tap.

3 Trim your beard first. If you wear a beard, it is best to first cut your hair as short as possible with scissors or a clipper. The machine is even more suitable for this than the scissors. Try to cut as much of your hair as possible all over your beard.

• Do not lather your beard if it is thick, and do not try to shave it off right away. This procedure will be painful and ineffective.

4 Wash your face with a special cleanser. To prepare your skin for shaving, you should cleanse it to protect it from infection and irritation while shaving. Use quality natural products. After washing, pat dry your skin with a towel.

5 Apply shaving oil. Shaving oil is used to moisturize the skin and lubricate the blades, making it easier for them to glide over the skin. Shaving oil is not the same as shaving cream. Put a few drops of oil on your hand and rub it into your beard before applying the cream to make it easier for the shaver to move over your skin. This will also help protect your skin from irritation.

6 Steam your face. Usually barbers warm up the skin with warm towels. This widens the pores and softens the hairs, making it easier to cut them short. Now sometimes hot cloths are used for these purposes. Temperature and moisture will soften and lift hair and open pores.

• Make sure the water is not very hot. Water that is too hot will dehydrate the skin and leave it vulnerable. The napkin or towel should be warm, not hot.

7 If possible, apply the shaving cream with a special brush (shaving brush). To some, this may seem old-fashioned, but this method of application will further soften the beard and moisturize the skin. This will also help guide the hairs in the right direction.

• If you run out of cream, gel or foam, use hair conditioner or special shaving oil, and if left on the skin for a minute, their effect will even increase. Do not use regular soap, as it will leave deposits on the blade and dull it, which will rust even on stainless steel blades. You can use liquid soap as it has a different composition.
• Choose natural shaving products over glycerin-based creams and gels because they dry out your skin and cause irritation. Look for creams made with natural oils and other beneficial products.

Method 2 of 3: Shave

1. 1 Start shaving while your pores are open and warm. After washing your face, immediately start shaving while the skin is still damp and the pores have not yet narrowed. This will allow you to achieve maximum skin smoothness. Don't waste time on other treatments at this point.
2. 2 Pull the skin tightly with your free hand. Try to create as smooth and even surface as possible. This will be especially useful when shaving areas of the nasolabial folds, as well as the chin. Take a razor with your other hand.
3. 3 Shave for hair growth. Run your hand over your beard.In one direction, the hairs will stand, and in the opposite direction, they will lie (in this direction you need to shave). To shave off all hairs, keep the blade parallel to the surface of your skin.
   • Shave with short, light downward strokes. This will help you shave your entire face smoothly.
4. 4 Shave in small areas. Shave slowly, carefully, and in a comfortable way. Don't rush like you're late for work. Start on one side of your face and move on to the other, gradually working on small areas of skin and cutting off all the hairs on them. If you do everything right the first time, you will save yourself time and hassle.
5. 5 Rinse your shaver regularly. Rinse it in the sink of water, then tap the edge of the razor against the sink to remove any cut hairs. It is important to keep your razors from getting dirty with hair and multi-blade cream, as this will reduce the razor's performance.
6. 6 Rinse with warm water and check with your fingers to see if everything is shaved. Pay attention to the areas near the ears, the corners of the mouth, and under the nostrils.
   • Apply shaving cream to your face and sweep the razor against hair growth. Also pay attention to the hair on the neck and jaw line, which usually grows in all directions at once (if you shave only up and down, such areas can be accidentally skipped).

Method 3 of 3: Finish shaving

1. 1 Rinse with cold water and pat dry your face with a clean towel. Cold water will tighten your pores and finish shaving. It will also help stop bleeding from small cuts.
   • If you cut yourself, apply witch hazel to prevent skin irritation. Place damp pieces of paper towel or toilet paper over any scratches that will bleed.
2. 2 Apply an alcohol-free aftershave balm to your face. Aloe and tea tree oil can help prevent dry skin and razor irritation. All natural products moisturize and keep skin healthy, so apply a small amount of an aftershave to your skin and rub it thoroughly into the skin you just shaved.
   • Remember that scene from the movie "Home Alone" when the hero puts aftershave on his skin and screams in pain? Yes. After shaving products can burn, but only if they contain alcohol. Avoid alcohol-based products as they will dry out your skin and cause irritation.
3. 3 Rinse shaving tools. Rinse everything thoroughly, dry and hide in a dry place. It is much more difficult to infect enlarged pores with a clean razor. Change blades as needed. The sharp blade does not irritate the skin as much or cause dryness.
4. 4 Shave frequently to help your skin look better. Shaving every few days will cause hair to thicken, making it harder to shave. The more often you shave, the cleaner your face will be after each shave and the better your complexion will be. Shaving removes dead skin particles and prevents pores from clogging, especially if you are taking good care of your skin after shaving.
   • Buy a styptic pencil if you frequently cut while shaving. You just need to wet the pencil and smoothly slide it over the cuts. The substance in the pencil will narrow the blood vessels and stop the blood flow.

Tips

• To keep the bathroom mirror from fogging up, apply a little shampoo to it.
• If you have a very thick beard, apply a warm compress before shaving to soften your hair. Change your razor blades often as they will dull faster.
• Some people enjoy washing their face and shaving in the shower. The steam helps prepare the skin and hair for shaving, while the pressure of the water washes away any residual cream or gel that may have remained on the skin after shaving. Try shaving in the shower to see if this will be easier for you, although it won't be very convenient without a mirror.
• Someone manages to shave without the use of gels and creams, using only hot water and a simple razor.
• Shave in straight strokes only, and the edge of the blade should be perpendicular to the area of ​​skin you are shaving. Since the blade is very sharp, keeping it parallel will cut your skin.
• Lean over a sink or large container of hot water and cover your head with a towel. Steam your face for 10 minutes before shaving. You will be pleasantly surprised by how much fewer cuts and red spots remain on your skin.
• The blade should touch the skin at an angle of 45 degrees or less. The larger the angle, the more likely you are to cut yourself. You should run the razor across your face without feeling the razor against your skin.
• Avoid using pig bristle brush if you have sensitive or oily skin. There are a large number of different shaving creams on the market now. Choose a cream that's right for your skin type. It is best to use badger hair brushes. If you have very sensitive skin, use a soft cosmetic brush, although an electric shaver may be better for you.

Warnings

• Shave the hair around your moles and Adam's apple very carefully.
• Try not to shave against hair growth - this will help prevent ingrown hairs and other problems. If you really need to shave against hair growth, do this: lubricate the skin with gel, shave along the hair growth, and then lubricate the skin again and run the razor against hair growth.