Content

• Steps
• Tips
• Warnings

Do you have small cheap water balls that burst so easily? Is it difficult for you to inflate them? Follow the further instructions and you will succeed.

Steps

1. 1 Take any bead you can find in cheap knick-knacks stores.
2. 2 Inflate and stretch before filling with water. If you don't stretch it, it may burst.
3. 3 Start pulling back the neck. Don't pull too hard; stretch to fit a faucet or small hose.
4. 4 Slide the stretched neck of the ball onto the mixer. A small trickle of water will suffice. Turn off the water before the balloon fills to the brim.
5. 5 Leave a few centimeters from the edge of the neck so that the ball can be tied tightly.
6. 6 Your water ball is ready. Enjoy!

Tips

• Follow the entire process of inflating the water balloon over the sink.
• Make sure the balls are tied tight or they may burst before you throw them!
• Use a watering can as an option.
• You might find the inflatable pump used by clowns useful.
• There are special kits for inflating balloons. You can screw them onto the mixer and inflate even balloons with a small neck !!!
• Some people may not like being doused with water, so ask their permission before throwing the ball.
• Whenever possible, do everything under the guidance of an adult.

Warnings

• If the balloon bursts, everything can get wet.
• Water balls are a choking hazard, so clean up after yourself.
• Be careful: some people don't feel like getting wet!