Content

• To step
• Method 1 of 3: Remove the blood on the surface
• Method 2 of 3: Remove the stain
• Method 3 of 3: Protect the mattress
• Warnings

Removing blood stains can be very difficult, because blood contains a lot of proteins. To wash blood stains from a mattress, first remove the blood that has not yet drawn into the mattress as best you can, then carefully clean not only the stain area but also the surrounding area. Another important part of the cleaning process is letting the mattress dry completely. A damp mattress will mold quite quickly.

To step

Method 1 of 3: Remove the blood on the surface

1. Remove all bedding. To remove any stain from a mattress, you will need to be able to access the outside of the mattress directly. Therefore, first remove all pillows, blankets, duvets, sheets, mats and any other items from the mattress.Set the cushion and any accessories aside so that they do not get dirty during cleaning.
   • If there is blood on the sheets, pillowcases, blankets, and other washable bedding, pre-treat with an enzyme cleaner or stain remover. Let the cleaner work for about 15 minutes and then wash the bedding in the washing machine.
2. Blot the stained area with a damp cloth. Immerse a clean cloth or rag in cold water. Wring the cloth out as best you can so that it is cool and moist. Now put the cloth on the blood stain and press on the spot so that the stain absorbs water. Do not rub, because rubbing can actually cause the stain to penetrate even deeper into the fibers of the mattress.
   • Only use cold water. Hot water can cause the stain to adhere, making it even more difficult to remove.
3. Blot the area with a dry towel. After allowing the stain to soak up with water, take a clean, dry towel and gently pat the area to soak up the blood from the mattress. Keep dabbing until the stain and surrounding area are dry and no more blood gets on the towel. Do not rub the towel, otherwise you will push the stain deeper into the mattress.
4. Repeat the wet and dry process. Rinse the damp cloth with cold water. Wring out the cloth as best you can. Blot the stain again until it is full of water again. Then take a clean, dry cloth and dab as much water and blood as possible with it until the entire area is dry.
   • Continue to wet and pat dry the mattress until the dry cloth remains completely clean when you push it against the damp spot.

Method 2 of 3: Remove the stain

1. Prepare a cleaning solution. There are many cleaning solutions you can use to try and remove blood stains from a mattress. Oxygen-based bleach or a ready-to-use enzyme cleaner are often the best choices because these cleaners are specifically designed to break down proteins in organic materials such as blood. Other cleaning solutions you can try include:
   • A mixture of 120 ml of liquid detergent and 30 ml of water, shaken until it is nice and foamy.
   • One part baking soda mixed with two parts cold water.
   • A firm paste of 55 grams of cornstarch mixed with one tablespoon (20 grams) of salt and 60 ml of hydrogen peroxide.
   • One tablespoon (15 ml) of ammonia mixed with 230 ml of cold water.
   • A paste of one tablespoon (15 grams) of meat softener and two teaspoons (10 ml) of cold water.
2. Soak the stain area completely with the cleaning solution. If you are using a liquid cleaning mixture, dip a clean cloth into the liquid and wring it out as best you can. Pat the stain with the cloth until the cloth is soaked. If using a paste or paste, cover the stain completely with the mixture using a knife or your finger.
   • Mattresses with memory foam in particular should not get wet at all. Therefore, to clean such a mattress, do not use more detergent than is necessary to soak the stain.
   • Never spray a mattress directly with a liquid. Mattresses can absorb a lot of moisture, so if a liquid does not dry properly, it can break down the fibers of the mattress or cause mold.
3. Let the solution work for half an hour. That way, you give the cleaner time to fully absorb into the stain and break down the proteins, making it easier to clean the blood.
4. Rub the area to loosen any residual stain. After about half an hour, rub the stain with a clean toothbrush to work the detergent in further. You can also dab the area again with a clean cloth. By rubbing or dabbing, you should break down the proteins in the stain, causing the stain to disappear.
5. Blot up the blood and detergent as best you can. Immerse a clean cloth in cold water. Wring out the cloth as best you can. Pat the area you just cleaned with the wet cloth to remove as much of the detergent and blood remaining in the mattress as possible.
   • Keep dabbing until no residue of detergent or blood is visible.
6. Dry the area with a clean towel. Dab the area one last time with a clean, dry towel to remove as much of the moisture remaining in the mattress as possible. Cover the area you cleaned with the towel. Then press the towel down with your flat hands. Due to the pressure you exert on the cleaned area with this, the cloth will absorb the moisture.

Method 3 of 3: Protect the mattress

1. Let the mattress air dry. Once you've removed the stain, let the mattress air dry uncovered for several hours, or preferably overnight. This prevents moisture from remaining in the mattress and preventing mold from growing on it. To speed up the drying process, you can do the following:
   • Aim a standing fan at the mattress and set it to the highest setting.
   • Open the curtains so that the sunlight can dry the mattress.
   • Open a window to let more fresh air into the room.
   • Place the mattress outside in the sun and fresh air for a few hours.
   • Use a vacuum and wet vacuum cleaner to suck up the water.
2. Vacuum the bed. Vacuum the entire outside of the dry mattress to remove any residual dirt and dust particles. By regularly cleaning your mattress you can make it last longer. Attach the nozzle intended for carpet cleaning to the vacuum cleaner and use it to clean the top and bottom, sides and seams of the mattress.
3. Cover the mattress. Mattress covers are water resistant covers that protect your mattress against spills, stains and other accidents. For example, if you spill something on the mattress, the cover will repel the moisture so that the mattress does not get wet.
   • Mattress pads are easy to clean. If you spill your mattress, or if another accident occurs, clean the pad according to the care instructions. Some pads can be washed in the washing machine, but there are also pads that you should clean with a damp cloth.
4. Make the bed. Only when the mattress is completely dry and clean, and after you have put a protective cover around it, put the washed (cover) sheet on it, followed by the other sheets that you use to make your bed, and the covers and pillows you are used to. to use. The sheets protect your mattress against sweat, dust and other dirt while you sleep.

Warnings

• If the blood you are removing is not your own, wear non-permeable gloves to protect yourself from blood borne diseases.