Content

• Steps
• Method 1 of 3: Paper Scroll
• Method 2 of 3: Cloth Scroll
• Method 3 of 3: Antique Scroll
• Tips
• Warnings
• What do you need
• Additional articles

Scrolls can be used for party invitations, as play props or costume accessories, for wall decoration, and more. The appearance of a scroll depends on what materials it is made of. Depending on the purpose and your preferences, scrolls can look new or old, sophisticated or simple. The ability to make a scroll can come in handy for many occasions.

Steps

Method 1 of 3: Paper Scroll

1. 1 Choose paper. The paper must be longer than a regular sheet so that it can be rolled into a roll. In addition, the strip of paper must be already in use, so it may need to be trimmed around the edges. For a scroll, you can use a variety of paper, for example:
   • two glued along ordinary sheets of white paper;
   • brown wrapping paper;
   • parchment paper;
   • rice paper;
   • papyrus paper.
2. 2 Select the rods. These can be round pins made of wood, metal or plastic. Wooden rods are usually used for scrolls. You may need to cut the rods to match the length of the paper. In this case, the length of the rods should exceed the width of the sheet of paper by 2.5-5 centimeters. The thinner the rod, the tighter you can wrap paper around it. For rods, you can use round bars of various diameters:
   • 0.5 centimeters;
   • 1 centimeter;
   • 1.5 centimeters;
   • 2 centimeters;
   • 3 centimeters.
3. 3 Paint on the paper. Decide how you want your scroll to look and what you want to display on it.If you are at a loss with the choice, try depicting Chinese characters or still life. Choose how you will decorate the scroll:
   • drawing;
   • seal;
   • colored pattern;
   • calligraphic inscription;
   • hand lettering or drawing.
4. 4 Collect the scroll. You can attach one rod to the top of the sheet of paper, or use two rods, at the top and bottom of the sheet. Attach the rods to the edges of the paper using strong glue. Press the rods firmly against the paper for a few seconds so that they adhere properly.
   • Apply glue along the entire edge of the sheet of paper.
   • You can also wrap the paper around the rod and glue it to itself. If you decide to use this method, you need to wrap the paper around the core as tightly as possible so that it fits snugly around it.
5. 5 Decorate the scroll. The decorations will give the scroll an authentic and original look. There are many ways to decorate a scroll to make it look unique.
   • Tie a ribbon to the edge of the rod so that it hangs down.
   • Attach decorations such as wooden steering wheels to the ends of the rods. This is easier to do before winding the paper around the rods.
   • Roll up the scroll and tie it with ribbon, braid, or cord.
6. 6 Roll up the scroll. This can be done in two different ways.
   • If you are using a single rod, wrap all the paper around it, and then tie it with tape, braid, or cord to keep it from unrolling.
   • For two rods, wind the paper around each of them so that they meet in the middle of the paper. After that, you can also tie the scroll up with ribbon, braid, or cord.

Method 2 of 3: Cloth Scroll

1. 1 Choose the right fabric. Cloth scrolls are more durable than paper, so use this method if you want a long lasting scroll. Fabrics look different and can have a modern or antique look - choose one that suits your needs. Light-colored fabrics without a pattern are better if you want to decorate the canvas with a lettering or pattern. The following types of fabrics can be used:
   • muslin;
   • mat;
   • light canvas;
   • cotton fabric;
   • silk.
2. 2 Find the rods. Select rods of suitable diameter. Thicker rods should be used for thick fabrics, thinner rods can be used for light fabrics. You may need to trim the rods so that they are 2.5 to 5 centimeters longer than the width of the fabric strip.
3. 3 Cut the fabric to the size you want. Determine what length and width you need for the scroll. The strip of fabric should be 2.5-5 centimeters narrower than the rods. Cut the fabric with sharp tailor's scissors.
4. 4 Attach the fabric to the rods. It is best to make a tight loop at the end of the cut into which the rod can be threaded.
   • Place the fabric with the right side down.
   • Wrap the edge of the fabric around one bar so that it protrudes at least 1.3 centimeters from the bar.
   • Take a pencil and lightly mark the line along which the cut edge is located.
   • Set the rod aside and sew on the edge of the cut, so that at the end you get a through pocket. Make sure the edge lines up with the line you marked with a pencil. It is best to sew the edge by hand.
   • Do the same for the second cut edge.
   • Thread the rods into the resulting through pockets.
5. 5 Paint on the fabric. The best way to do this is to use fabric paint or craft paint. Another option is to apply the paint through a silk stencil. You can also use a waterproof marker or even a printer.
   • If you decide to print a pattern, check if your printer can print on fabric.
6. 6 Make the scroll hangable. Attach a ribbon, string, or cord to the scroll so it can be hung on the wall in a visible place. You can tie the ends of the tape around the edges of the top bar that protrude from the fabric. This method is good because the tape will prevent the fabric from slipping off the core.
   • You can also glue the cord to the top edge of the fabric.

Method 3 of 3: Antique Scroll

1. 1 Decide what to make the scroll from: made of paper or fabric. You can use both paper and cloth to create an antique scroll. The choice of material depends on the purpose of the scroll. For example, if the scroll will serve as an invitation to a party, it is better to use paper, and if you want to use the scroll as a decoration or gift, it is advisable to make it out of fabric.
   • First, you need to give the future scroll an old look, and only then collect it.
2. 2 Draw a drawing or lettering on the scroll. Use a paint, marker or printer for this.
   • Some colors may change during the process of giving a vintage look to a paper or cloth scroll.
   • If you want the scroll to really look ancient, black is best.
3. 3 Touch up the scroll with coffee or tea. Brew coffee or black tea and use a foam brush to apply it to fabric or paper. Coffee will give a much darker color than tea.
   • Dip the brush in coffee or tea and gently squeeze out the excess.
   • Apply coffee or tea to the scroll. At the same time, change the angle of the brush and the amount of liquid applied.
   • Try to make the surface of the scroll look uneven. Alternate between darker and lighter areas to give the scroll a vintage look.
4. 4 Finish processing the scroll. To make the paper or fabric look old, there are a few final touches left to do.
   • If you are using paper, after applying coffee, you can put it in a preheated oven for about 5 minutes (or until the paper is dry). You can also charcoal the edges of the paper by holding them over a candle flame, and if the paper catches on fire, immediately blow out the fire. Pass the candle flame around the entire perimeter of the paper.
   • If you are using fabric, dry it and then trim the edges slightly to make it look frayed. This method is only suitable for certain types of fabric, such as matting. If it doesn't suit your fabric, try applying more coffee or tea to the edges to darken them.
5. 5 Collect the scroll. When the fabric or paper is completely dry, you can start assembling the scroll.
   • Secure the rods with glue or thread.
   • Additionally, decorate the rods with dangling ribbon or wooden details.
   • Roll up the scroll or hang it on the wall.

Tips

• Use a strong enough all-purpose glue or wood glue to hold the rods and scroll together.
• Wait until the canvas is completely dry before collecting the scroll.
• Attach the decorations to the rods before collecting the scroll.

Warnings

• Do not print on parchment paper. Parchment paper has a waxed surface that can damage the printer.
• Be careful when charring the edges of the paper. The paper burns very quickly and the flame can get out of your control. Do this over a sink, and it is best to have a fire extinguisher handy.
• Oven drying and charring the edges should be done by an adult.

What do you need

• Rod (or rods)
• Paper or cloth
• Scroll paints, markers or printer
• Glue or needle and thread
• Ribbon, braid or cord
• Coffee or tea
• Foam Brush

Additional articles

How to make a paper scroll How to draw a scroll How to fix a zipper if the slider has come off completely How to make candles at home How to make and transfer an iron-on transfer to fabric How to restore the binding and cover of a book How to sew How to make a Chinese slip knot How to measure the length of an inner seam How to make dog hair yarn How to make perfume from flowers and water at home How to use thermal mosaic How to make a rubber band bracelet on a rainbow loom How to make your skin tighter