Content

• Part 2 of 3: Clean the tile with a baking soda paste
• Part 3 of 3: Prevent dirt build-up

1 Turn on hot water in the shower. Turn on the water for 10 minutes. Hot water will open the pores of the tile, making it easier to clean.

2 In a bowl, mix water and vinegar in a 1: 1 ratio. Mix the ingredients thoroughly and then pour the solution into a spray bottle. SPECIALIST'S ADVICE

Fabricio ferraz

Cleaning professional Fabricio Ferras is a co-owner and employee of the cleaning company Hire a Cleaning. Hire a Cleaning is a family owned business that has served homes in San Francisco, California for over 10 years.

Fabricio ferraz
Cleaning professional

Want to buy the product you need in the store? Cleaning consultant Fabrizio Ferraz says: “If you want to clean your tiles with a store-bought product, buy a BPA-free spray. It can be used every day and is harmless to the skin. "

3 Spray the tiles with the solution. Spray generously on the dirtiest areas as well as the tile joints.

• We'll use this solution again later, so don't use all of it or make some more.

4 Wait 5 minutes. The solution will loosen the lather. If the plaque is severe, you may need to wait half an hour or more.

5 Remove soap suds with a brush. Use a stiff-bristled brush or a tile-joint brush for this. Loosen the lather to help rinse it off.

6 Rinse the tiles with warm water. To do this, turn on the water in the shower again. Make the water a little cooler this time so it is barely lukewarm.

• The tiles can be rinsed out of a bucket or jug ​​of water.

Part 2 of 3: Clean the tile with a baking soda paste

1. 1 Mix 1: 3 water and baking soda in a bowl. Mix water and baking soda together to form a thick paste. Its consistency should resemble toothpaste. If the paste is thin, add more baking soda until thick enough.
   • To remove stubborn stains, replace half of the water in your recipe with peroxide.
   • Clean the tiles with a specialized cleaner if you don't want to use a baking soda paste.
2. 2 Apply the paste with a sponge. Spread the paste over the tiles. Apply a generous amount of paste to tile joints and stubborn stains.
3. 3 Spray the paste with the vinegar solution. The vinegar will react with the baking soda and begin to bubble. The vinegar will help the paste to penetrate the soapy residue on the tiles.
4. 4 Scrub the tiles with a stiff brush. Use a stiff or tiling brush for this. Clean the tile in a circular motion. Press down hard to remove stubborn stains and mildew from tiles and joints.
   • Use a toothbrush in hard-to-reach places.
5. 5 Rinse the tiles with warm water. Rinse tiles from a bucket or pitcher. Pour in water until all dirt and soap suds are removed.
   • You may need to rinse the tiles 3-5 more times.
6. 6 Dry the tiles with a clean towel. This will prevent water from collecting in corners and recesses, which in turn will prevent mold and mildew from forming.

Part 3 of 3: Prevent dirt build-up

1. 1 Spray the tiles with the vinegar solution. Do this after showering 2-3 times a week to keep tiles clean for longer.
   • Write “tile spray” on a spray bottle and leave it in the bathroom. If you have children, place the bottle on the top shelf where they cannot reach.
2. 2 Clean the tiles with a rubber scraper. Store the scraper in the tub and use it to wipe the tiles 5-7 times a week after showering.
   • Don't forget to wipe in corners and grooves.
3. 3 Dry the tiles with a towel. Store a towel specifically designed for this job in the bath. Wipe the tiles 5-7 times a week after showering.