Content

• Advice
• Warning

• Wrap a towel to screw it up if the cap is too hot.
• Do not let boiling water run through the cap for too long. The bottle cap can melt, and even damage the water bottle.

Break the bottle cap. Hold the water bottle firmly in your hand and hit the hard surface hard. You can forcefully tap the cap without worrying about the bottle exploding. The lower the price of the plastic bottle, the easier the cap will come off.

Start cutting the sealing part. Using the saw blade back and forth on the sealing line. Continue until some of the sealing line is cut.

Try using your hands. After a seal is cut, it is easier to open the lid by hand. Firmly twist the bottle cap anticlockwise.

Sawing the rest of the sealing line. If you still cannot screw the bottle cap by hand, use a knife to saw the remainder of the seal. Continue until the entire sealing line is completely cut off, then turn the lid on by hand again.

Remove the bottle cap. Once the seal has been cut off completely, you should be able to easily open the bottle cap. advertisement

Method 3 of 4: Open with elastic band

1. 

   
   
   Wrap the elastic band around the bottle cap. Start wrapping the elastic around the bottle cap. Elastic bands will play a role in increasing friction.

2. 

   Wrap the rubber band a few times around the top of the bottle. Make sure the elastic band is wrapped tightly around the lid. The length of the elastic should be evenly spaced across the cap.

3. 

   Turn counter-clockwise. Use force to break the seal. If successful, you will hear a crack sound.

4. 

   
   
   Unscrew the bottle cap. Once the seal is gone, you will be able to remove the bottle cap easily and enjoy the drinking water inside. advertisement

Method 4 of 4: Open the bottle in the traditional fashion

1. 

   Hold the water bottle. Grasp the bottom of the water bottle with your non-dominant hand.

2. 

   Place your dominant hand on the top of the bottle. Hold the bottle cap tightly.
   • If the grooves on the cap are too sharp, you can use a shirt to line the sleeve between the cap.

3. 

   Turn the cap anticlockwise. Use torque until the cap loosens. You must grip the body of the bottle tightly to only screw the cap, not the entire bottle.
   • Place the bottle firmly on the surface to prevent water from splashing.

4. 

   Screw the cap on the bottle. After breaking the seal, you can use your finger to gently twist the lid.

5. 

   Enjoy the water in the bottle. advertisement

Advice

• Put the water bottle in the refrigerator for about 30 minutes to make the water taste better.
• You can also use a hair elastic instead of an elastic band.
• The non-slip mat will also help when opening the bottle.

Warning

• Do not use teeth. This is not good for both bottle caps and your teeth. If you're unlucky, you may have to have a filler afterwards.
• Water may overflow if you hold the body of the bottle too tightly.