How to Make Smoking Pipe from Apples

Author: Monica Porter
Date Of Creation: 21 March 2021
Update Date: 1 July 2024
Anonim
How To Make An Apple Pipe
Video: How To Make An Apple Pipe

Content

  • Pierce a hole from the top through the apple. Place the tip of the stylus from where you just removed the stem and swirl on the apple. Press the pen until you make a hole that spans about half the apple.
    • If you find it difficult to press the pen inside the apple, you can press and rotate the pen while pressing.
    • When you have made your first hole with the tip of the pen, you can lift the pen, detach the tip, and use the tipless pen to push through the bottom of the apple. The apple will slide into the empty pen tube. When you're done, take out the pen and throw away the apple crumbs.

  • Pierce a second hole near the bottom of the apple. This hole should be about 1 cm from the center of the bottom of the apple and cut across the first hole you made earlier.
  • Pierce the third hole from the edge of the apple. Press the pen from the edge into the apple to make about 2-3 cm from the first hole from the top. Push the pen into the apple until the third hole intersects with the hole system you made. This hole acts as a smoke vent when you smoke, so it should be conveniently located so you can cover the hole with your finger while you are filling the straw.

  • Create a medication hole. Use a pen or other sharp object to cut a hole in the top of the apple where you made the first hole. Swipe wide enough to fit the ingredients of the tobacco you want to smoke.
  • Smoking. Insert the medicine you want to smoke into the pill hole. Hold the apple in one hand with your finger covering the smoke hole - the third hole you've made on the apple's body. Use your other hand to light the fire and suck with your mouth through the hole near the bottom of the apple.
  • Method 2 of 2: Making an Empty Apple Straw


    1. Cut off the top (lid) of the apple. Cut about 2.5 cm from the stem of the apple. Remove the stem from the apple's lid.
      • Don't cut too close to the stem. The lid will be made into a pill hole, so it should be thick and hard enough.
      • You may have to swirl the stem off the lid. Take care not to damage the apple lid.
    2. Cut the intestine to create a suction chamber. Use a spoon to create a circular suction chamber from the intestines of the apple. Rotate the spoon around the edge of the apple to create a circle about 1 cm from the edge of the apple. Press the spoon against the apple to remove the flesh, about 1 cm from the bottom of the apple.
      • Don't cut too deeply into the edge or bottom of the apple when you use a spoon. The straw will not be stiff enough unless you leave enough apple to build a strong tube structure.
      • Use a knife to cut the core of the apple in the middle of the circle if you can't use a spoon to cut the flesh off the apple. Cut the core of the apple several times if needed, then cut the apple around with a spoon.
    3. Create smoke ventilation and nozzle. Keep the bottom of the apple. Make the carb and mouthpiece. Hold the base of the apple in your hand. Use the pencil to carefully poke a hole about one inch below the rim of the apple. This will be the smoke vent. Poke a second hole a few centimeters from the smoke vent to create a nozzle.
    4. Smoking. Place the lid on the apple. Stick the medicine you want to suck in the hole in the apple's lid (that's where you took the stem). Hold the apple in one hand with your finger covering the smoke hole and place your mouth on the nozzle. Use your other hand to light a fire and smoke.

    Advice

    • Use the freshest apple you have.
    • Stop smoking as soon as the apple becomes soft.

    What you need

    Make an Apple Straw with a Pen

    • The apple
    • Ballpoint pens

    Making An Empty Apple Straw

    • The apple
    • Knife
    • Spoon
    • Pencil