Content

• Steps
• Method 1 of 3: The Incredible Bottle # 1: A Deck of Cards in a Bottle
• Method 2 of 3: The Incredible Bottle # 2: Tennis Ball in a Bottle
• Method 3 of 3: The Incredible Bottle # 3: Rubik's Cube in a Bottle
• Tips

Incredible bottles are literally an incredible result of special attention, patience, a steady hand and a lot of lateral thinking. This article will show you how to place some of the items in the Incredible Bottle.

Steps

Method 1 of 3: The Incredible Bottle # 1: A Deck of Cards in a Bottle

1. 1 Remove plastic wrap and discard.
2. 2 Take out the cards.
3. 3 Heat the sticker with a hair dryer. You can easily remove it without damaging it.
4. 4 Again, using a hair dryer or a sharp knife, cut the bottom seam of the box so that it can be flattened.
5. 5 Place the flattened, rolled-up box into the bottle and reshape it. Using a bent piece of wire or other suitable tool, glue the bottom seam in place with glue. Strong glue dries quickly and it won't allow you to glue the seam in place, so be patient and use craft glue.
6. 6 Place the cards in the box one at a time.
7. 7 Close the box and heat up the sticker so you can reattach it. If it doesn't stick well enough, use some more glue.

Method 2 of 3: The Incredible Bottle # 2: Tennis Ball in a Bottle

1. 1 Pierce the ball in the fluffy part of it (split it apart so you don't pull out too much of the fluff when you make the hole; later you will comb the fluff back so that the hole isn't visible).
2. 2 Hold the ball in a vise and release all the air from it.
3. 3 Close the hole with a bicycle pump needle.
4. 4 Fold the ball (or roll it up) and tuck it into the bottle.
5. 5 Turn the bottle upside down so that the needle sticks out of the neck. Attach a flexible hose to the end of the needle (for inflating bicycle tires) and attach the other end to the bicycle pump.
6. 6 Inflate the ball again and remove the needle.
7. 7 Mask the hole by flattening the pile and / or applying a few drops of paint to it. Note that you can seal the hole in the ball with strong glue; if it inflates on its own, just poke the hole in the ball again.

Method 3 of 3: The Incredible Bottle # 3: Rubik's Cube in a Bottle

The Rubik's Cube in a Bottle is an option for very advanced creators of incredible bottles. Take this job only if you are confident in your capabilities. This is a very difficult task, it takes a lot of time, which can be wasted as a result.

1. 1 Disassemble the Rubik's cube into 27 pieces.
2. 2 Reassemble the cube inside the bottle. Please note that in order to solve the Rubik's cube, you need a bottle with a diameter of 8.5 cm at its widest part. You will need to nudge each cube and push it into place, and to do this, you will need long tweezers or another tool with equally long handles. They will help you apply enough force.

Tips

• You can try doing the same with other items - ships in a bottle are the most popular variant of the incredible bottle, but there are already too many of them. Try stuffing something unexpected into the bottle.
• First, try this with a larger bottle that is not easy to break. In this case, it will be easier for you to shove objects into the bottle and take them out of there without fear of breaking the glass.