Content

• Steps
• Advice
• What you need

A rusted bike can turn your fun outing into a tough smudged ride or take away its shine. Don't rush your car to the auto repair shop: you can remove rust in most cases. Depending on how rusting your bike is, you can use household materials like baking soda and vinegar or chemicals to get the job done. Once you have cleared the rust, you will be back to quiet revs in your car.

Steps

Method 1 of 3: Use baking soda to treat mild rust marks

1. 

   Mix baking soda and water in a bowl. Mix the half baking soda and water mixture thoroughly in the bowl until it turns into a dough. You need to use enough mixture to cover the rusted area, so keep a bowl, baking soda and water nearby in case you need more.
   • Baking soda is usually most effective when dealing with mild rust marks. More severe conditions may respond better with other methods.
   • Squeeze a little more lemon juice into the mixture to increase the cleaning effect.

2. 

   
   
   Spread the mixture over the rust marks and let sit for 15 minutes. Use a brush or sponge to apply rust on the bike. Don't scrub or wipe it off yet: it takes time for the mixture to dissolve the rust. You should leave the mixture on the rust for about 10-15 minutes.
   • Baking soda mix should have a texture that is thick enough to spread evenly over the rusted patches without dripping.

3. 

   
   
   Use a scouring sponge to scrub the baking soda. Use a plastic brush or steel wool to scrub the baking soda. As you scrub, you will notice rust melting and peeling off your bike. If you don't see results, spread the baking soda mixture on your bike and rub it harder.
   • If you don't have a scouring pad, you can replace it with a toothbrush.

4. 

   
   
   Wait about 10 minutes before wiping off the baking soda. After the scrub is finished, leave the baking soda alone for 10-15 minutes to treat stubborn rust. The next step is to wipe the mixture off with a dry microfiber cloth. Make sure the bike is completely dry to prevent rust from coming back.
   • Store your bike in a cool, dry place to prevent further rusting.
   • If the rust still remains, repeat the steps above or try a different method.
   advertisement

Method 2 of 3: Use vinegar to treat stubborn stains

1. 

   Pour white vinegar into a spray bottle. White vinegar is most effective at rust removal because it is more acidic than other types of vinegar.While you can apply vinegar directly to the rust, using a spray bottle is the ideal way to ensure even coverage of the vinegar.
   • Add 1 teaspoon of baking soda to the mixture to add more corrosive properties.

2. 

   Spray or rub vinegar on rusted areas on your bike. If using a spray bottle, spray the entire rust evenly. Use a sponge or circular aluminum foil to rub vinegar over the rust if you don't use a spray bottle. Aluminum foil is especially effective as a brush while rubbing vinegar.
   • If you want, you can soak your bike's detachable parts in vinegar.

3. 

   Rinse off the vinegar on the bike after 10-15 minutes. Vinegar can continue to corrode the metal of your bike after it has removed the rust. To prevent this, wash your bike with a hose after the rust has been dissolved.
   • If the vinegar is not able to effectively remove the rust, you may need a chemical cleaner.

4. 

   Dry the bike before storing it. Humidity can cause the bike to rust again. Clean your car with a denatured alcohol rag to remove moisture. Store the car in a cool, dry place to prevent rust. advertisement

Method 3 of 3: Try chemical rust removers

1. 

   Use chemical rust remover if other methods are ineffective. In some cases, household products are not strong enough to remove rust. Try baking soda and vinegar first, but if neither of these methods works, you can buy chemical rust removers from a hardware store or bicycle store.
   • Do not mix rust cleaning chemicals with baking soda, vinegar, citric acid or other cleaners. Some mixtures can be fatal.

2. 

   Wear gloves and goggles before using detergent. The cleaning chemicals are much stronger than the other methods and can be harmful to the eyes or skin. Read the instructions carefully to ensure safety when using. If the detergent gets in your eyes or skin, rinse it thoroughly and call poison control for instructions.
   • Avoid using chemical detergents in an enclosed space. Open windows or doors to ventilate, and leave the room immediately if you feel dizzy and / or lightheaded.

3. 

   Scrub rust with chemical detergent according to the instructions. The time it takes for detergent to stay on the rust layer will depend on the product. Recommended time can range from 30 minutes to overnight. Read the instructions on the specific product label carefully and carefully use it accordingly for best results.
   • If you need a quick rust cleaner, read the labels when shopping at the store and choose one with a short waiting time.

4. 

   Wipe off the detergent after the recommended time has elapsed. Cleaning chemicals are corrosive, so use a rag to clean it after you have completed the rust removal step. Store the remainder in a place where other chemicals are stored, in case you need them again.
   • Throw away the rag after using it to keep it from spreading to other fabrics.
   advertisement

Advice

• Rinse your bike and remove dirt and debris before starting to use rust removal methods.
• Vinegar and baking soda are the cheapest methods of rust removal.
• Store your bike in a cool, dry, dark place so that it doesn't rust again.
• Waterproof the bike to prevent rust.

What you need

• Baking soda
• Country
• Lemon (optional)
• Suck on the scouring pad or toothbrush
• Brush
• The sponge
• Aluminum foil
• White vinegar
• Aerosol
• Mirofiber fabric
• Chemical rust remover
• Protective gloves
• Goggles