How to remove beer stains from fabric

Video: How To Remove A Beer Stain - Beer Stain Cleaning Tips

Content

Method 2 of 4: How to Remove Beer Stains from Upholstery
Method 3 of 4: How to remove carpet stains
Method 4 of 4: How to remove water stains on microfiber
Tips
Warnings

1 Soak a cloth in warm water. Dilute dish soap and vinegar in water. For a liter, you need a tablespoon of vinegar and half a tablespoon of detergent. Stir all the liquids and soak the thing in them.

Leave the item on for 15 minutes.
Rinse.

2 Treat the stain. Try rubbing the stain with rubbing alcohol. Pour some rubbing alcohol onto a sponge and blot gently, starting from the center. If the stain is large, you will need to take some rubbing alcohol again.

Do not rub too hard or damage the fabric.
If the sponge gets very dirty, stop and wash it with soap and water.

3 Try cleaning the stain with bioactive products. Dissolve a tablespoon of the soaking agent in a liter of warm water. Fill the stained item with liquid. Make sure the water is completely soaked in the fabric. Leave it on for half an hour.

Then examine the item and find out if there is a stain. If the stain does not fade, leave the item in the water for a while.
You can remove organic stains with enzyme detergents.
You can buy such funds in large hypermarkets and hardware stores.

4 Machine wash as usual. Set the maximum permissible temperature for this type of fabric. Add detergent and bleach or stain remover. If the fabric is white, bleach will work, and if the fabric is colored, a special stain remover will do. Wash the item as usual.

The maximum allowable temperature for washing is indicated on the label of the garment. It may also indicate which wash mode to use.
The fabric may only be washed in cold water. Do so.

5 See if the stain has been removed. If the stain persists, repeat all over again before drying. Drying stained fabric can set the stain. Remove the stain completely before moving on to drying. Once the stain has been removed, you can wash the item normally.

Check if the smell remains. If the fabric still smells like beer, try removing the stain again.
Pay attention to the color. If the fabric has changed color, wash it again.

Method 2 of 4: How to Remove Beer Stains from Upholstery

1 Blot the stain with a paper towel. First, you need to remove as much liquid as possible from the fabric - this will simplify further work. Use regular white paper towels as colored paper towels can stain the fabric.
- Make sure to find all the stains. Beer can splatter, so it's important to find all traces of liquid right away.
2 Prepare your detergent. You will need a simple solution. It can be made from what is at home. There are several types of cleaning solutions and they will all suit you.
- A solution of rubbing alcohol and white vinegar. Take 150 ml of alcohol, add a tablespoon of vinegar, stir.
- A solution of water and dish detergent. Dissolve a tablespoon of dishwashing liquid in 500 ml of water. Mix thoroughly.
- Both solutions will help remove the stain, so use what you have at home. You can first try applying the solution to an inconspicuous area of the upholstery to see if it will ruin the fabric. Different tissues react differently to these solutions.
3 Apply the solution to a cloth. Dip a clean cloth into the solution. It is best to use a white fabric - it will not stain the upholstery. Press the fabric against the upholstery. Hold to soak the beer into the rag.
4 Continue to press down on the fabric. Wet the rag again and press it against the upholstery. Gradually, the stain should begin to fade. You may need to repeat the procedure 3-4 times. Make sure the stain is gone before moving on to the next step.
5 Rinse the stain area with a rag and clean water. Apply a cloth dampened with clean water to the upholstery. Blot the cloth to completely remove any remaining detergent. When clean, blot the upholstery with a dry cloth to dry the fabric.

Method 3 of 4: How to remove carpet stains

1 Blot the stain with a paper towel. This will remove most of the liquid from the surface, making it easier to deal with the stain. Plus, if there is less liquid left on the carpet, you won't have to put in a lot of effort in subsequent steps.
- Make sure to find all the stains. Perhaps there are others.
2 Prepare a cleaning agent. You will need vinegar, dishwashing detergent, peroxide (3%). You will need to make and use two tools.
- To make the first solution, combine vinegar and water. Take one part vinegar and two parts water. If the stain is small, use a third of a glass of vinegar and two-thirds of a glass of water.
- Make sure there is no bleach in the dishwashing liquid before preparing the second solution, as it can create a hazardous substance when combined with peroxide. If your dish soap contains lanolin, it will be more difficult to remove the stain, so it's best to use a cleaner without lanolin. Stir one fourth teaspoon of the product in a glass of water.
- You will need to use peroxide separately.
3 Start with a vinegar solution. Pour it into a spray bottle to make it easier to apply. Treat the stain so that it is saturated with liquid. Then blot the stain with a clean paper towel.
4 Apply a solution with detergent. Dip a clean cloth or sponge into the solution. It is best to use a white rag as it will not stain the carpet. Dampen the stain with the solution.
- Alternate solutions until the stain is gone.
- Most likely, you will need to repeat everything at least 3-4 times.
5 Rinse off the solution. Now you need to rinse the product off the carpet with water. The easiest way is to draw water into a spray bottle and treat the stain. Then blot the area with paper towels. Repeat until all the foam is washed off.
6 Dry the carpet. When no foam remains on the carpet, dry the carpet with paper towels. Place a stack of paper towels on top of the rug and press them down with something heavy (like a brick).
- If you don't have a brick, any heavy object that you don't mind getting wet will do. You can also wrap the item in plastic first.
7 Check to see if the stain has washed off. When the carpet is dry, examine the area of the stain. If the stain is not completely washed off, treat it with peroxide. Apply the peroxide to the carpet with a clean rag.
- Leave the peroxide on for an hour. If the stain is still visible, blot it up and apply peroxide again. Leave the peroxide on for another hour. Repeat until the stain disappears. You do not need to wash off the peroxide.
- When the stain is gone, place a stack of paper towels on top of the carpet and press down with something heavy.

Method 4 of 4: How to remove water stains on microfiber

1 Find the stain. Sometimes, after removing beer stains, water streaks remain on the fabric, which must be removed. Make sure there are no beer traces on the fabric. Before you start removing water stains, it is important to get rid of any beer residues.
- See if the beer has discolored the fabric. Sometimes it happens.
- Try sniffing the spot area. If the beer is not washed, you will have to repeat the entire cleaning process again.
2 Lightly dampen the cloth with a clean white rag. The rag should be soft, otherwise the fabric could be damaged. Dip a rag in water and wring it out. Press the rag against the stains, but not very hard. The upholstery should be damp but not wet. Then you will need to dry the fabric faster than before.
3 Dry the fabric with a hair dryer. Water will leave streaks if it takes too long to dry. A hairdryer will speed up the process. Dry the fabric until it is completely dry and streak-free.
- It is important to remove the beer stain first, because if you start drying it with warm air, it will adhere to the fabric, making it impossible to remove later.

Tips

Try to remove the stain as soon as possible. If you wait, the stain may adhere to the fabric, making it difficult to remove later.
Test the stain remover on an inconspicuous area of fabric, if possible (for example, on the back of a sofa). If the solution damages the fabric, no one will see it, and you can choose another fabric cleaner.
You can also use commercial stain removers, but do not buy a product if it says it will create a stain protection film. These products can set the stain on the fabric.
Sometimes it is possible to remove old beer stains with turpentine, but if you choose to use it, work in a well-ventilated area and wear gloves. Apply some turpentine to the stain, and when it disappears, rinse the area of the fabric.