Content

• Steps
• Tips
• What do you need

For those who don't want to use a screwdriver to pry out dirty, broken bearings from skateboard wheels, there is an alternative method that works much better.

Steps

1. 1 Unscrew the wheel bolts and remove it from the axle. Use the part of the axle that you just removed the wheel from to remove all 4 wheels.
2. 2 Hold the newly removed wheel on the axle with the metal tip between the two bearings.
3. 3 Insert the axle diagonally between the bearings.
4. 4 Turn the wheel 45 degrees and apply the force of the lever.
5. 5 If done correctly, the bearing that is on the inside (in the direction of the axle) should gradually come out of the wheel.
6. 6 Flip the wheel over and repeat the process to remove the second bearing.
7. 7 Repeat this procedure for the other 3 wheels.

Tips

• Use leverage.

What do you need

• Skateboard with dirty or broken wheels.
• Key to remove the wheel from the axle.